Order Products : sales@su-jiao.com
Nylene® 132 HS
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Custom Resins Group |
| Trademark: | Nylene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t3h9XZ_Nylene-132-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nylene® 132 HS is a Polyamide 66 (Nylon 66) material. It is available in North America for extrusion or injection molding. Important attributes of Nylene® 132 HS are:
Typical application of Nylene® 132 HS: Automotive |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 50 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2860 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 235 | °C | |
| 1.8 MPa, Unannealed | 90.0 | °C | |
| Melting Temperature | 254 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Suggested Shot Size | 25 to 75 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 260 to 282 | °C | |
| Middle Temperature | 271 to 293 | °C | |
| Front Temperature | 282 to 304 | °C | |
| Nozzle Temperature | 279 to 302 | °C | |
| Processing (Melt) Temp | 282 to 304 | °C | |
| Mold Temperature | 48.9 to 93.3 | °C | |
| Injection Pressure | 27.6 to 82.7 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 20.7 to 62.1 | MPa | |
| Back Pressure | 0.00 to 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 AR 5 | RTP Company | Nylon 66 | RTP |
| NuSil CV-2500-2 | NuSil Technology | Silicone | NuSil |
| ExxonMobil™ PPT0170F | ExxonMobil Chemical | PP Homopolymer | ExxonMobil™ |
| Lucalen A 3110 M | LyondellBasell Industries | EAA | Lucalen |
| SQUARE® LIM2012-30A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
