TECHNYL® C 236SI V30 NATURAL Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 236SI V30 Natural is a polyamide 6 reinforced with 30% of glass fiber, with improved impact resistance, for injection moulding. This grade offers high impact strength and good mechanical properties.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 30% filler by weight
Additive	Impact modifier
Features	Impact resistance, good Good liquidity Good demoulding performance
Uses	Industrial application Outdoor application Sporting goods Consumer goods application field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6-GF30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.34	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.93	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	9500	5200	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	150	95.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	4.0	--	%	ISO 527-2
Flexural Modulus (23°C)	7600	4000	MPa	ISO 178
Flexural Stress (23°C)	227	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	13	--	kJ/m²	ISO 179/1eA
23°C	18	32	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	98	98	kJ/m²	ISO 179/1eU
23°C	92	100	kJ/m²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	205	--	°C	ISO 75-2/Af
Melting Temperature	222	--	°C	ISO 11357-3

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.080	%
Rear Temperature	250 - 270	°C
Middle Temperature	260 - 280	°C
Front Temperature	260 - 290	°C
Mold Temperature	70 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	t39fgv_TECHNYLC236SIV30NATURAL.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Makrolon® LQ3187	Covestro - Polycarbonates	PC	Makrolon®
APEX® 1560	Teknor Apex Company	PVC, Flexible	APEX®
IDI BMC B30 (Glass Content 25%)	IDI Composites International	TS, Unspecified	IDI BMC
Plaslube® PC CF15 TL6 BK	Techmer Engineered Solutions	PC	Plaslube®
POCAN® KU 2-7503/1 000000	LANXESS GmbH	PBT	POCAN®