Order Products : sales@su-jiao.com

KMI PP KM-047IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	t1gSIF_KMIPPKM047IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-047IB is a highly isotactic block copolymer with high crystalinity. It shows and excellent balance of strength and impact resistance due to the application of high crystalline technology and the most appropriate rubber design. Its excellent gloss and surface hardness also make it useful in the exterior of family appliances. Food Contact Application: KM-047IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Excellent flowability, strength and hardness High flowability/high strength: Allows for larger and thinner injection molded products High heat resistance -> High utilization temperature High crystalinity -> Short cooling time after injection molding to allow for high speed production Good surface hardness -> Superior scratch resistance

Message

KM-047IB is a highly isotactic block copolymer with high crystalinity. It shows and excellent balance of strength and impact resistance due to the application of high crystalline technology and the most appropriate rubber design. Its excellent gloss and surface hardness also make it useful in the exterior of family appliances.

Food Contact Application:
KM-047IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact.

Characteristics:

Excellent flowability, strength and hardness

High flowability/high strength: Allows for larger and thinner injection molded products

High heat resistance -> High utilization temperature

High crystalinity -> Short cooling time after injection molding to allow for high speed production

Good surface hardness -> Superior scratch resistance

General Information
Features	Block Copolymer High isotactic Rigidity, high Highlight High crystallization High strength Impact copolymer High scratch resistance High liquidity Heat resistance, high Compliance of Food Exposure High hardness
Uses	Electrical appliances
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	97		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	33.3	MPa	ASTM D638
Tensile Elongation (Break)	> 50	%	ASTM D638
Flexural Modulus	1720	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	59	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	132	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
VINIKA® CF90HA	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Flexible	VINIKA®
APEX® 164	Teknor Apex Company	PVC, Flexible	APEX®
Eraclene® MM 70 U	Versalis S.p.A.	HDPE	Eraclene®
Jam HM-8355(BL4)	Jam Petrochemical Company	HDPE	Jam
Sylvin 8773-60D Brown 7373	Sylvin Technologies Incorporated	PVC, Rigid	Sylvin