Order Products : sales@su-jiao.com

Ingeo™ 6201D

Category:	PLA , Polylactic Acid
Manufacturer:	NatureWorks® LLC
Trademark:	Ingeo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	t16aiB_Ingeo-6201D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Ingeo biopolymer 6201D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6201D is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. 6201D is typically well suited for fiber processes where lower fiber shrinkage is desired: partially orientated yarn (POY), fully drawn yarn (FDY), staple fibers, and continuous filament. Ingeo biopolymer 6201D can be converted into a broad range of fiber products.

Potential applications for PLA polymer 6201D include:

Woven and knitted 100% continuous filament apparel

Woven and knitted, intimate

Staple blend fabrics including blends with cotton, wool, and other fibers

Woven and knitted fabrics and netting for civil engineering applications

Home furnishings

General Information
Features	Biodegradable Compostable Food Contact Acceptable Low Shrinkage Renewable Resource Content
Uses	Fabrics Filaments Household Goods Staple Fibers Textile Applications Yarn
Agency Ratings	EU 10/2011 EU 2002/72/EC FDA Food Contact, Unspecified Rating
Forms	Pellets
Processing Method	Fiber (Spinning) Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)	15 to 30	g/10 min	ASTM D1238
Relative Viscosity	3.10		Internal Method
Shrinkage			ASTM D2102
Boiling Water	5.0 to 15	%
Hot Air : 130°C ¹	5.0 to 15	%

Mechanical	Nominal Value	Unit	Test Method
Modulus of Elasticity	30.0 to 40.0	g/denier	ASTM D2256

Additional Information	Nominal Value	Unit	Test Method
Denier - per filament	> 0.500
Elongation of Fibers	10 to 70	%	ASTM D2256
Tenacity of Fibers	2.50 to 5.00	g/denier	ASTM D2256

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	55.0 to 60.0	°C	ASTM D3417
Peak Crystallization Temperature (DSC)	155 to 170	°C	ASTM D3418

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density (230°C)	1.08	g/cm³

Extrusion	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	4.0 to 6.0	hr
Suggested Max Moisture	< 5.0E-3	%
Melt Temperature	220 to 240	°C

Note Message
1 .	10 min

Resin Grade	Manufacturer	Category	Trademark
SuperLite® SL551800-100 (4.0mm)	Azdel, Inc.	PP, Unspecified	SuperLite®
Xuchuan XCW-6102M	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
NuSil MED-1137	NuSil Technology	Silicone	NuSil
Devcon Edge & Seal T-35	Devcon	PUR, Unspecified	Devcon
Geon™ Vinyl Flexible R355AM	PolyOne Corporation	PVC+NBR	Geon™ Vinyl Flexible