Order Products : sales@su-jiao.com

3M™ Dyneon™ PTFE Compound FC 15025

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ PTFE Compound
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sz5XqQ_3MDyneonPTFECompoundFC15025.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ PTFE Compound FC 15025 is a non-free-flowing suspension PTFE compound containing 25% hard carbon for compression moulding.

Special Features

Increased thermal dimensional stability

Increased surface hardness

Improved deformation under load

Reduced friction & wear

Low moulding pressure

High limiting oxygen index (LOI)

Low friction behaviour

Improved mechanical properties

Exceptional temperature resistance

Good chemical stability

General Information
Filler / Reinforcement	Carbon fiber reinforced material, 25% filler by weight
Features	Low friction coefficient
Uses	Seals Application in Automobile Field
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.05	g/cm³	ASTM D4745-06
Apparent Density	0.38	g/cm³	ASTM D4894-07
Molding Shrinkage - Flow	1.9	%	ASTM D4894-07

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	72		DIN 53505

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	20.0	MPa	ASTM D4745-06
Tensile Elongation (Break)	180	%	ASTM D4745-06

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8465-70 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Axiall PVC 18640	Axiall Corporation	PVC, Flexible	Axiall PVC
Atlac 711-05A	Reichhold Chemicals, Inc.	Polyester, TS	Atlac
DIGITALWAX® RF 080	DWS Systems	Unspecified	DIGITALWAX®
INEOS LDPE 21D430	INEOS Olefins & Polymers Europe	LDPE	INEOS LDPE