Order Products : sales@su-jiao.com
Generic ABS+PC - Mineral
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sxlSLA_Generic-ABS-PC---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic ABS+PC - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 - 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.30 - 0.41 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 55.0 - 61.0 | MPa | ASTM D638 |
| Fracture, 23°C | 35.0 - 51.2 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Fracture, 23°C | 4.0 - 90 | % | ASTM D638 |
| Fracture, 23°C | 6.0 - 30 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2450 - 5880 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 49 - 100 | J/m | ASTM D256 |
| 23°C | 5.0 - 9.3 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 87.3 - 105 | °C | ASTM D648 |
| Vicat Softening Temperature | 92.0 - 142 | °C | ISO 306 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 105 | °C | |
| Drying Time | 3.5 | hr | |
| Suggested Max Moisture | 0.020 - 0.040 | % | |
| Rear Temperature | 230 - 240 | °C | |
| Middle Temperature | 243 - 256 | °C | |
| Front Temperature | 260 - 268 | °C | |
| Nozzle Temperature | 259 - 269 | °C | |
| Processing (Melt) Temp | 259 - 260 | °C | |
| Mold Temperature | 70.0 - 71.3 | °C | |
| Back Pressure | 0.505 - 1.47 | MPa | |
| Screw Speed | 55 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic ABS+PC - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Udel® P-3703 | Solvay Specialty Polymers | PSU | Udel® |
| Grilamid® XE 3915 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Plenco 01530 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
| Kepex® 3930GFU | Korea Engineering Plastics Co., Ltd | PBT+ASA | Kepex® |
| ULTEM™ 2310F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
