Order Products : sales@su-jiao.com
Gallonprene® GP100-6502
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | svrsgc_Gallonprene-GP100-6502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP100-6502 is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Gallonprene®GP100-6502 application areas include engineering/industrial accessories, consumer goods and handles. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/1.0 kg) | 18 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 65 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 5.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 700 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 130 - 150 | °C | |
| Middle Temperature | 140 - 160 | °C | |
| Front Temperature | 150 - 170 | °C | |
| Processing (Melt) Temp | 110 - 130 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Injection instructions |
|---|
| Processing Temperature Limit: 220°CInjection Pressure: LowBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 150 to 170°CCenter Temperature: 160 to 180°CFront Temperature: 170 to 190°CMelt Temperature: 110 to 130°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 220°CInjection Pressure: LowInjection Speed: LowBack Pressure: 20 to 50% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TROGAMID® T T-GF35 | Evonik Industries AG | Nylon 6/3T | TROGAMID® T |
| Forprene® 6NM901A70 | SO.F.TER. SPA | TPV | Forprene® |
| Lupox® SG5200 | LG Chem Ltd. | PBT+PET | Lupox® |
| Petro Rabigh PP AW564 | Rabigh Refining & Petrochemical Co. | PP Impact Copolymer | Petro Rabigh PP |
| ESTOPLAST XU 6315GY01 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
