Order Products : sales@su-jiao.com

Miramid® VE35CW

Category:	Nylon 6 , Polyamide 6
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	stVRt9_Miramid-VE35CW.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® VE35CW is a Polyamide 6 (Nylon 6) material filled with 35% glass fiber. It is available in Europe for injection molding.

Important attributes of Miramid® VE35CW are:

Chemical Resistant

Crystalline

Fast Molding Cycle

Good Stiffness

Heat Stabilizer

Typical applications include:

Engineering/Industrial Parts

Automotive

Construction Applications

Electrical/Electronic Applications

Sporting Goods

General Information
Filler / Reinforcement	Glass Fiber, 35% Filler by Weight
Additive	Heat Stabilizer Mold Release
Features	Crystalline Fast Molding Cycle Fuel Resistant Good Flow Good Stability Good Stiffness Grease Resistant Heat Stabilized High Rigidity Oil Resistant Solvent Resistant
Uses	Automotive Applications Building Materials Electrical/Electronic Applications Engineering Parts Machine/Mechanical Parts Sporting Goods
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1410	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	5.5	--	%
Equilibrium	1.6	--	%
Viscosity number	145	--	cm³/g	ISO 307, 1157, 1628 ³

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	10000	7000	MPa	ISO 527-2 ⁴
Tensile Stress (Break)	180	115	MPa	ISO 527-2 ⁵
Tensile Strain (Break)	3.0	6.0	%	ISO 527-2 ⁶
Flexural Stress ⁷	280	160	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA ⁸
-30°C	12.0	--	kJ/m²
23°C	14.0	23.0	kJ/m²
Charpy impact strength				ISO 179/1eU ⁹
-30°C	60.0	--	kJ/m²
23°C	90.0	100	kJ/m²

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2 ¹⁰
0.45 MPa	215	--	°C
1.8 MPa	205	--	°C
Melting Temperature (DSC)	220	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ¹¹
Dielectric Constant (1 MHz)	3.60	6.00		IEC 60250
Dissipation Factor (1 MHz)	0.020	0.20		IEC 60250 ¹²
Comparative tracking index	500	--		IEC 60112 ¹³

Injection	Dry	Unit
Processing (Melt) Temp	260 to 290	°C
Mold Temperature	80.0 to 120	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Typical values for uncoloured product at 23°C
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
12 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
13 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
RTP 201 TFE 20 SI	RTP Company	Nylon 66	RTP
Rynite® 935 BK505	DuPont Performance Polymers	PET	Rynite®
AMTOPP CM25	Inteplast Group	PP, Unspecified	AMTOPP
Latiohm 90/13-09 PD01 G/10	LATI S.p.A.	PPE+PS	Latiohm
Kapex C042	Ginar Technology Co., LTD.	PC	Kapex