Order Products : sales@su-jiao.com
CERTENE™ HGB-0454A
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | spoATF_CERTENE-HGB-0454A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HGB-0454A is a certified prime Gas Phase process BLOW MOLDING copolymer designed to meet end-use requirements of containers for packaging of Household Industrial Chemicals (HIC). HGB-0454A features medium swell, easy and consistent processability in conventional continuous or intermittent extrusion equipment, and excellent balance of bottle ESCR, Impact strength and Stiffness. Applications include medium size containers for detergents, bleach, antifreeze, motor oil and ice chests. HGB-0454A recommended processing temperature is 160 to 180°C., with mold at 10 to 30°C. HGB-0454A contains no slip and no antiblock. HGB-0454A conforms with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning polyethylene use in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | 60.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | > 700 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 205 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Brittleness Temperature | < -90.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Mold Temperature | 10 - 30 | °C | |
| Blow Molding Temperature | 160 - 180 | °C | |
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN5008FL | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| DIALAC® AVR300 | UMG ABS, Ltd. | ASA | DIALAC® |
| INNOPOL® PP CS 2-3516 MO | Inno-Comp Ltd. | PP Impact Copolymer | INNOPOL® PP |
| PENTAMID B S GV50 H natural | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| NORYL™ SA120 resin | SABIC Innovative Plastics | PPE | NORYL™ |
