Order Products : sales@su-jiao.com
Formolene® L62009B
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sp2YcC_Formolene-L62009B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® L62009B is a general-purpose film grade linear low density made using gas-phase technology. The resin exhibits excellent toughness and strength when drawn down to thin gauges. Formolene® L62009B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.95 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 32.8 | MPa | |
| TD : Break | 24.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 520 | % | |
| TD : Break | 780 | % | |
| Dart Drop Impact | 160 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 400 | g | |
| TD | 630 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 33 | ASTM D523 | |
| Haze | 21 | % | ASTM D1003 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Blow-up Ratio | 2.5:1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 700 MG 30 | RTP Company | HDPE | RTP |
| SAMAT 666-3T | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | SAMAT |
| Tectron E1177 | TECTRON Systems Pte Ltd | TPV | Tectron |
| NEXT REPROCESSED PP CA53-300R | NEXT Specialty Resins, Inc. | PP, Unspecified | NEXT REPROCESSED |
| KOPLA PA6 KNG1050 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
