Order Products : sales@su-jiao.com
ESENTTIA 60C90ND
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | siPky4_ESENTTIA-60C90ND.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: High melt flow rate control reologhy Impact block copolymer polypropylene; good impact/stiffness balance; tough weld line; with nucleant and mold release additives. Recommended for: Injection molding of thin wall rigid containers, fast cycle time; injection molding general purpose applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 60 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 5.2 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1210 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 59 | J/m | ASTM D256A |
| Gardner Impact 5 | ASTM D5420 | ||
| -30°C, 3.20 mm, Injection Molded | 22.6 | J | |
| 23°C, 3.20 mm, Injection Molded | 12.4 | J |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CALP 4650GF | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Anjaflam® 500-FR | Almaak International GmbH | ABS | Anjaflam® |
| Gallonprene® GP210-3004 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Hifax X M1 T11 BLACK | LyondellBasell Industries | PP Copolymer | Hifax |
| SIBUR Synthetic Rubber IR SKI-3 Group I | SIBUR | IR | SIBUR Synthetic Rubber |
