Order Products : sales@su-jiao.com
Sevrene® 3000-45A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | si8xgx_Sevrene-3000-45A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sevrene® 3000-45A is a Thermoplastic Elastomer (TPE) material. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Wear Resistance 1 | Pass |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging 2 | |||
| 38°C | 88 | % | |
| 95°C | 88 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arizona Weathering 3 | 0.190 (Black) | SAE J1976 | |
| Fade Resistance | |||
| Exterior Xenon 4 | 0.660(Black) | SAE J1960 | |
| Interior Xenon 5 | 0.760(Black) | SAE J1885 | |
| Florida Weathering 6 | 0.500(Black) | SAE J1976 | |
| Tear Strength - (Loss of, after heat aging) | -15 | % | ISO 34 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 7(Yield) | 5.20 | MPa | ISO 37 |
| Tensile Elongation 8(Break) | 850 | % | ISO 37 |
| Tear Strength 9 | 19 | kN/m | ISO 34-1 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact 10(-30°C) | No Break | Internal Method |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Stress (100°C, 1000 hr) | -3.0 | % | ISO 1817 |
| Change in Tensile Strain at Break (100°C, 1000 hr) | 14 | % | ISO 1817 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | < 34 | mm/min | ISO 3795 |
| Note Message | |
|---|---|
| 1 . | LP463KB-06-01 |
| 2 . | LP463DB-12-01, 6 hrs |
| 3 . | 2 years, Delta E |
| 4 . | 2500 j/m², Delta E |
| 5 . | Delta E |
| 6 . | 2 years, Delta E. |
| 7 . | 500 mm/min |
| 8 . | 500 mm/min |
| 9 . | Method Ba, Angle (Unnicked), 500 mm/min |
| 10 . | LP463DB-14-01 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit庐 3520CG | Vyncolit N.V. | Phenolic | Vyncolit® |
| NIMA HL 18400 | Ovation Polymers Inc. | HDPE | NIMA |
| 4LEX® 10F13300 | 4Plas | PC | 4LEX® |
| LNP™ THERMOCOMP™ KF006XXC compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ THERMOCOMP™ |
| Sarlink® TPE ME-2180B (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
