Order Products : sales@su-jiao.com
TECOLITE KM-30B(J)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | shxfQ3_TECOLITE-KM-30B-J-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Good moldability and Good productivity. Provides suitable compounds and Superior cost performance. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" have a good high voltage resistance and a good moldability. "TECOLITE" are designed for insulation boards and telecommunication parts. Moreover coloring compounds are possible. Therefore can select the most suitable compounds for parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | |
| Molding Shrinkage | |||
| Flow 1 | 1.1 to 1.3 | % | |
| Flow 2 | 0.60 to 0.80 | % | |
| Across Flow 3 | 0.90 to 1.1 | % | |
| Water Absorption (Equilibrium) | < 0.40 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 88.0 to 108 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 165 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+9 to 1.0E+10 | ohms | |
| As Molded | 1.0E+10 to 1.0E+11 | ohms | |
| Dielectric Strength | > 10 | kV/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.710 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenopom® POM B3 M3 NTLA014 PR301 | Petropol Industry and Trade of Polymers LTDA | Acetal (POM) Copolymer | Tenopom® POM |
| CYCOLOY™ CE3510 resin | SABIC Innovative Plastics Europe | PC+ABS | CYCOLOY™ |
| Dryflex® 4068 | ELASTO | TPE | Dryflex® |
| Edgetek™ CY4000 NC002 | PolyOne Corporation | PC+PBT | Edgetek™ |
| Iupital® MF3020 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
