Order Products : sales@su-jiao.com
DIAMALOY ABSPC 7000M
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | DIAMALOY ABSPC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sh0COX_DIAMALOY-ABSPC-7000M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Diamaloy ABSPC 7000M resin is a non-reinforced, naturally opaque and is available in custom colors. High heat and impact resistance. USP CLass VI Medical Grade. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) 1(265°C/5.0 kg) | 23 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow | 0.40 to 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2(Injection Molded) | 2280 | MPa | ASTM D638 |
| Tensile Strength 3(Yield) | 51.7 | MPa | ASTM D638 |
| Flexural Modulus 4 | 2280 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 530 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 110 | °C | ASTM D648 |
| Vicat Softening Temperature | 145 | °C | ASTM D1525 5 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 93.3 | °C | |
| Drying Time - Desiccant Dryer | 4.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 221 to 232 | °C | |
| Middle Temperature | 227 to 235 | °C | |
| Front Temperature | 249 to 260 | °C | |
| Nozzle Temperature | 249 to 263 | °C | |
| Mold Temperature | 65.6 to 79.4 | °C |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type I |
| 3 . | Type I, 51 mm/min |
| 4 . | Method I (3 point load), 1.3 mm/min |
| 5 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 1095 | Covestro - Polycarbonates | PC | Makrolon® |
| Styrolution PS 456EB | INEOS Styrolution Group GmbH | PS (HIPS) | Styrolution PS |
| E-FLEX™ S1060 | Mando Advanced Materials Co., Ltd. | TPE | E-FLEX™ |
| KRATON® G2874 GO-N | Kraton Polymers LLC | SEBS | KRATON® |
| Dryflex® SE 75A201 | ELASTO | TPE | Dryflex® |
