Order Products : sales@su-jiao.com

Sinpolene MBW1381

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Teknor Apex Asia Pacific PTE. LTD.
Trademark:	Sinpolene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sgYgPq_Sinpolene-MBW1381.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Sinpolene MBW1381 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins. With its high pigment loading, Sinpolene MBW1381 offers high colouring value with excellent quality and performance. The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide. Sinpolene MBW1381 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High opacifying power * Excellent whiteness * Low die deposit

Message

Sinpolene MBW1381 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins. With its high pigment loading, Sinpolene MBW1381 offers high colouring value with excellent quality and performance.

The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide.

Sinpolene MBW1381 is delivered as free flowing pellets for processing convenience.

CHARACTERISTICS
* Easy processing
* Good dispersion
* High opacifying power
* Excellent whiteness
* Low die deposit

General Information
Filler / Reinforcement	Titanium Dioxide, 70% filler by weight
Uses	Films Masterbatch Sheet
Agency Ratings	FDA not rated
Appearance	White
Forms	Particle
Processing Method	Blow film Sheet extrusion molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.00	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	< 30	g/10 min	ASTM D1238
Moisture Content		%	ASTM D3030

Additional Information
Recommended dosage: 5 - 10% Recommended for Milk Packaging

Resin Grade	Manufacturer	Category	Trademark
Sylvin 9604-95 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Hostaform® C 9021 FCT1	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
IDI SMC S30 (Glass Content 20%)	IDI Composites International	TS, Unspecified	IDI SMC
Karina IVORY PVC COMPOUND 70900-35/1-E-AC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
NORYL™ PX0844 resin	SABIC Innovative Plastics	PPE+PS	NORYL™