Order Products : sales@su-jiao.com
BCC Resins BC 7009-2
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sdYf0G_BCC-Resins-BC-7009-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can be successfully achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 2.26 | g/cm³ | ASTM D792 |
| -- | 2.27 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 0.090 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 37.2 | MPa | ASTM D638 |
| Flexural Modulus | 5580 | MPa | ASTM D790 |
| Flexural Strength (Break) | 51.0 | MPa | ASTM D790 |
| Compressive Strength | 86.9 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 50.6 | °C | ASTM D648 |
| CLTE - Flow | 5.7E-5 | cm/cm/°C | ASTM D696 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0, Mix Ratio by Volume: 1.0 | ||
| Resin | Mix Ratio by Weight: 12, Mix Ratio by Volume: 4.5 | ||
| Pot Life (24°C) | 240 | min | |
| Thermoset Mix Viscosity | 35000 | cP | ASTM D2393 |
| Demold Time (24°C) | 1400 to 2200 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Temperature | 24 | °C | |
| Cure Time | 1.0 | day |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBB3034 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| VITAMIDE® BR13 | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| Wanthane® WHT-1490IV | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| HiFill® PA6/6 GF33 IM HS L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| KMI PP KM-021BB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
