Order Products : sales@su-jiao.com

KPOL-LDPE LD K-I 14/920B

Category:	LDPE , Low Density Polyethylene
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	saaLU5_KPOL-LDPE-LD-K-I-14-920B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Low Density Polyethylene Excellent Processability

Characteristics

The KPOL® resin is a low density polyethylene specially, developed for injection molding.

It exhibits high toughness with good flexibility and reasonable environmental stress cracking resistance and is therefore typically used for flexibles and tough articles.

Applications

Injection Molding of general purpose, typically suitable for injection moulding application, frequently used for caps & closures.

General Information
Additive	Antioxidant
Features	Antioxidant General Purpose Good Flexibility Good Toughness Low Density
Uses	Caps Closures
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	14	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	40		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	10.0	MPa	ASTM D638
Tensile Elongation ²(Break)	140	%	ASTM D638
Flexural Modulus - 1% Secant	3200	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	88.0	°C	ASTM D1525 ³

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Sindustris PP GP1008F	Sincerity Australia Pty Ltd.	PP, Unspecified	Sindustris PP
TIPELIN® 6300B	MOL Petrochemicals Co. Ltd.	HDPE	TIPELIN®
ALTECH® ABS A 1000/530	ALBIS PLASTIC GmbH	ABS	ALTECH® ABS
Grilamid® TR 90 TL	EMS-GRIVORY	Nylon 12	Grilamid®
Sylvin 8707-84 Blue 8471	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin