Index
About
Search
Contact Us
Order Products​ : sales@su-jiao.com

Texin® 990 R

Category: TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether)
Manufacturer: Covestro - PUR
Trademark: Texin®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: saLR0d_Texin-990-R.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Texin 990R resin is a polyether-based thermoplastic polyurethane with a Shore hardness of approximately 90A. It contains an internal mold release additive. This resin can be processed by injection molding or extrusion.
General Information
Additive
  • demoulding
Features
  • Impact resistance, good
  • Good flexibility
  • Good wear resistance
  • Hydrolysis resistance
  • Good toughness
  • Compliance of Food Exposure
Uses
  • Films
  • Wheels
  • Cable sheath
  • Washer
  • Pipe
  • Pipe fittings
  • Seals
  • Footwear
  • Profile
Agency Ratings
  • FDA 21 CFR 177.1680
  • FDA 21 CFR 177.2600
  • NSF 61
Appearance
  • Natural color
Processing Method
  • Extrusion
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.13g/cm³ASTM D792, ISO 1183
Molding Shrinkage
    Flow : 2.54mm 0.80%ASTM D955
    Transverse flow : 2.54mm 0.80%ASTM D955
    Vertical flow direction : 2.54mm 0.80%ISO 2577
    Flow direction : 2.54mm 0.80%ISO 2577
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore A)90ASTM D2240, ISO 868
MechanicalNominal ValueUnitTest Method
Flexural Modulus (23°C)41.4MPaASTM D790, ISO 178
Taber Abrasion Resistance
    1000 Cycles, 1000g, H-18 wheel 25.0mgISO 4649
    1000 Cycles, 1000g, H-18 wheel 25.0mgASTM D1044
ElastomersNominal ValueUnitTest Method
Tensile Stress
    50% strain 6.90MPaISO 37, ASTM D412
    100% strain 7.60MPaASTM D412, ISO 37
    300% strain 14.5MPaASTM D412, ISO 37
Tensile Strength (Yield)41.4MPaASTM D412, ISO 37
Tensile Elongation (Break)520%ASTM D412, ISO 37
Tear Strength
    -- 196.3kN/mASTM D624
    -- 96kN/mISO 34-1
Compression Set ASTM D395B, ISO 815
    23°C, 22 hr 215%ASTM D395B, ISO 815
    23°C, 22 hr 20%ASTM D395B, ISO 815
    70°C, 22 hr 335%ASTM D395B, ISO 815
    70°C, 22 hr 75%ASTM D395B, ISO 815
Bayshore Resilience 40%ASTM D2632
AgingNominal ValueUnitTest Method
Change in Tensile Strength in Air
    100°C, 70 hr 16%ASTM D573, ISO 216
    100% strain, 100°C, 70 hr 5.0%ASTM D573
    300% strain, 100°C, 70 hr 3.0%ASTM D573
    100°C, 168 hr 24%ASTM D573, ISO 216
    100% strain, 100°C, 168 hr 6.0%ASTM D573
    300% strain, 100°C, 168 hr 1.0%ASTM D573
    100°C, 336 hr 27%ASTM D573, ISO 216
    100% strain, 100°C, 336 hr 7.0%ASTM D573
    300% strain, 100°C, 336 hr -9.0%ASTM D573
    100°C, 504 hr -9.0%ASTM D573, ISO 216
    100% strain, 100°C, 504 hr -3.0%ASTM D573
    300% strain, 100°C, 504 hr -24%ASTM D573
    100% strain 100°C, 70 hr 5.0%ISO 216
    300% strain 100°C, 70 hr 3.0%ISO 216
    100% strain 100°C, 168 hr 6.0%ISO 216
    300% strain 100°C, 168 hr 1.0%ISO 216
    100% strain 100°C, 336 hr 7.0%ISO 216
    300% strain 100°C, 336 hr -9.0%ISO 216
    100% strain 100 c, 504 hr -3.0%ISO 216
    300% strain 100 c, 504 hr -24%ISO 216
Change in Ultimate Elongation in Air ASTM D573, ISO 216
    100°C, 70 hr 16%ASTM D573, ISO 216
    100°C, 168 hr 20%ASTM D573, ISO 216
    100°C, 336 hr 36%ASTM D573, ISO 216
    100°C, 504 hr 68%ASTM D573, ISO 216
Change in Durometer Hardness in Air ASTM D573, ISO 216
    Support d, 100°C, 70 hr 2.0ASTM D573, ISO 216
    Support d, 100°C, 168 hr 1.0ASTM D573, ISO 216
    Support d, 100 c, 336 hr 0.0ASTM D573, ISO 216
    Support d, 100 c, 504 hr 0.0ASTM D573, ISO 216
Change in Tensile Strength
    23°C, 70 hr, Class C Standard Fuel -28%ASTM D471
    100% strain, 23°C, 70 hr, Class C standard fuel -23%ASTM D471
    300% strain, 23°C, 70 hr, Class C standard fuel -22%ASTM D471
    23°C, 70 hr, in reference fuel A 12%ASTM D471
    100% strain, 23°C, 70 hr, in reference fuel A -5.0%ASTM D471
    300% strain, 23°C, 70 hr, in reference fuel A -6.0%ASTM D471
    23°C, 168 hr, Class C Standard Fuel -25%ASTM D471
    100% strain, 23°C, 168 hr, Class C standard fuel -20%ASTM D471
    300% strain, 23°C, 168 hr, Class C standard fuel -19%ASTM D471
    23°C, 168 hr, in reference fuel A 12%ASTM D471
    100% strain, 23°C, 168 hr, in reference fuel a -1.0%ASTM D471
    300% strain, 23°C, 168 hr, in reference fuel a -6.0%ASTM D471
    23°C, 336 hr, Class C Standard Fuel -27%ASTM D471
    100% strain, 23°C, 336 hr, Class C standard fuel -19%ASTM D471
    300% strain, 23°C, 336 hr, Class C standard fuel -19%ASTM D471
    23°C, 336 hr, in reference fuel A 7.0%ASTM D471
    100% strain, 23°C, 336 hr, in reference fuel A -4.0%ASTM D471
    300% strain, 23°C, 336 hr, in reference fuel A -10%ASTM D471
    23°C, 504 hr, Class C Standard Fuel -28%ASTM D471
    100% strain, 23°C, 504 hr, Class C standard fuel -16%ASTM D471
    300% strain, 23°C, 504 hr, Class C standard fuel -18%ASTM D471
    23°C, 504 hr, in reference fuel A 19%ASTM D471
    100% strain, 23°C, 504 hr, in reference fuel A -1.0%ASTM D471
    300% strain, 23°C, 504 hr, in reference fuel A -3.0%ASTM D471
    100°C, 70 hr, in ASTM #1 oil 15%ASTM D471, ISO 175
    100% strain, 100°C, 70 hr, in ASTM #1 oil 2.0%ASTM D471, ISO 175
    300% strain, 100°C, 70 hr, in ASTM #1 oil -1.0%ASTM D471, ISO 175
    100°C, 70 hr, in ASTM #3 oil 22%ASTM D471, ISO 175
    100% strain, 100°C, 70 hr, in ASTM #3 oil 2.0%ASTM D471, ISO 175
    300% strain, 100°C, 70 hr, in ASTM #3 oil -1.0%ASTM D471, ISO 175
    100°C, 168 hr, in ASTM #1 oil -10%ASTM D471, ISO 175
    100% strain, 100°C, 168 hr, in ASTM #1 oil 4.0%ASTM D471, ISO 175
    300% strain, 100°C, 168 hr, in ASTM #1 oil 14%ASTM D471, ISO 175
    100°C, 168 hr, in ASTM #3 oil 15%ASTM D471, ISO 175
    100% strain, 100°C, 168 hr, in ASTM #3 oil 4.0%ASTM D471, ISO 175
    300% strain, 100°C, 168 hr, in ASTM #3 oil 14%ASTM D471, ISO 175
    100°C, 336 hr, in ASTM #1 oil -4.0%ASTM D471, ISO 175
    100% strain, 100°C, 336 hr, in ASTM #1 oil 8.0%ASTM D471, ISO 175
    300% strain, 100°C, 336 hr, in ASTM #1 oil 1.0%ASTM D471, ISO 175
    100°C, 336 hr, in ASTM #3 oil 5.0%ASTM D471, ISO 175
    100% strain, 100°C, 336 hr, in ASTM #3 oil 8.0%ASTM D471, ISO 175
    300% strain, 100°C, 336 hr, in ASTM #3 oil 1.0%ASTM D471, ISO 175
    100°C, 504 hr, in ASTM #1 oil -12%ASTM D471, ISO 175
    100% strain, 100°C, 504 hr, in ASTM #1 oil 6.0%ASTM D471, ISO 175
    300% strain, 100°C, 504 hr, in ASTM #1 oil 3.0%ASTM D471, ISO 175
    100°C, 504 hr, in ASTM #3 oil -2.0%ASTM D471, ISO 175
    100% strain, 100°C, 504 hr, in ASTM #3 oil 6.0%ASTM D471, ISO 175
    300% strain, 100°C, 504 hr, in ASTM #3 oil 3.0%ASTM D471, ISO 175
    23°C, 70 hr, in Reference Fuel C -28%ISO 175
    100% strain, 23 c, 70 hr, in Reference Fuel C -23%ISO 175
    300% strain, 23 c, 70 hr, in Reference Fuel C -22%ISO 175
    23°C, 70 hr, in reference fuel A (isooctane) 12%ISO 175
    100% strain, 23°C, 70 hr, in reference fuel A (isooctane) -5.0%ISO 175
    300% strain, 23°C, 70 hr, in reference fuel A (isooctane) -6.0%ISO 175
    23°C, 168 hr, in Reference Fuel C -25%ISO 175
    100% strain, 23 c, 168 hr, in Reference Fuel C -20%ISO 175
    300% strain, 23 c, 168 hr, in Reference Fuel C -19%ISO 175
    23°C, 168 hr, in reference fuel A (isooctane) 12%ISO 175
    100% strain, 23°C, 168 hr, in reference fuel A (isooctane) -1.0%ISO 175
    300% strain, 23°C, 168 hr, in reference fuel A (isooctane) -6.0%ISO 175
    23°C, 336 hr, in Reference Fuel C -27%ISO 175
    100% strain, 23 c, 336 hr, in Reference Fuel C -19%ISO 175
    300% strain, 23 c, 336 hr, in Reference Fuel C -19%ISO 175
    23°C, 336 hr, in reference fuel A (isooctane) 7.0%ISO 175
    100% strain, 23°C, 336 hr, in reference fuel A (isooctane) -4.0%ISO 175
    300% strain, 23°C, 336 hr, in reference fuel A (isooctane) -10%ISO 175
    23°C, 504 hr, in Reference Fuel C -28%ISO 175
    100% strain, 23 c, 504 hr, in Reference Fuel C -16%ISO 175
    300% strain, 23 c, 504 hr, in Reference Fuel C -18%ISO 175
    23°C, 504 hr, in reference fuel A (isooctane) 19%ISO 175
    100% strain, 23°C, 504 hr, in reference fuel A (isooctane) -1.0%ISO 175
    300% strain, 23°C, 504 hr, in reference fuel A (isooctane) -3.0%ISO 175
Change in Ultimate Elongation
    23°C, 70 hr, Class C Standard Fuel 4.0%ASTM D471
    23°C, 70 hr, in reference fuel A 11%ASTM D471
    23°C, 168 hr, Class C Standard Fuel 3.0%ASTM D471
    23°C, 168 hr, in reference fuel A 0.0%ASTM D471
    23°C, 336 hr, Class C Standard Fuel 5.0%ASTM D471
    23°C, 336 hr, in reference fuel A 15%ASTM D471
    23°C, 504 hr, Class C Standard Fuel 3.0%ASTM D471
    23°C, 504 hr, in reference fuel A 7.0%ASTM D471
    100°C, 70 hr, in ASTM #1 oil 28%ASTM D471, ISO 175
    100°C, 70 hr, in ASTM #3 oil 28%ASTM D471, ISO 175
    100°C, 168 hr, in ASTM #1 oil 30%ASTM D471, ISO 175
    100°C, 168 hr, in ASTM #3 oil 30%ASTM D471, ISO 175
    100°C, 336 hr, in ASTM #1 oil 31%ASTM D471, ISO 175
    100°C, 336 hr, in ASTM #3 oil 31%ASTM D471, ISO 175
    100°C, 504 hr, in ASTM #1 oil 33%ASTM D471, ISO 175
    100°C, 504 hr, in ASTM #3 oil 33%ASTM D471, ISO 175
    23°C, 70 hr, in Reference Fuel C 4.0%ISO 175
    23°C, 70 hr, in reference fuel A (isooctane) 11%ISO 175
    23°C, 168 hr, in Reference Fuel C 3.0%ISO 175
    23°C, 168 hr, in reference fuel A (isooctane) 0.0%ISO 175
    23°C, 336 hr, in Reference Fuel C 5.0%ISO 175
    23°C, 336 hr, in reference fuel A (isooctane) 15%ISO 175
    23°C, 504 hr, in Reference Fuel C 3.0%ISO 175
    23°C, 504 hr, in reference fuel A (isooctane) 7.0%ISO 175
Change in Durometer Hardness
    Support D, 23°C, 70 hr, in Reference Fuel C -4.0ASTM D471, ISO 175
    Support D, 23°C, 70 hr, in reference fuel A 1.0ASTM D471
    Support D, 23°C, 168 hr, in Reference Fuel C -4.0ASTM D471, ISO 175
    Support D, 23°C, 168 hr, in reference fuel A 0.0ASTM D471
    Support d, 23 c, 336 hr, in Reference fuel c -4.0ASTM D471, ISO 175
    Support D, 23°C, 336 hr, in reference fuel A 2.0ASTM D471
    Support D, 23°C, 504 hr, in Reference Fuel C -3.0ASTM D471, ISO 175
    Support D, 23°C, 504 hr, in reference fuel A 0.0ASTM D471
    Support D, 100°C, 70 hr, in ASTM #1 oil -5.0ASTM D471
    Support D, 100°C, 70 hr, in ASTM #3 oil -5.0ASTM D471
    Support D, 100°C, 168 hr, in ASTM #1 oil -4.0ASTM D471
    Support D, 100°C, 168 hr, in ASTM #3 oil -4.0ASTM D471
    Support D, 100°C, 336 hr, in ASTM #1 oil -3.0ASTM D471
    Support D, 100°C, 336 hr, in ASTM #3 oil -3.0ASTM D471
    Support D, 100°C, 504 hr, in ASTM #1 oil -2.0ASTM D471
    Support D, 100°C, 504 hr, in ASTM #3 oil -2.0ASTM D471
    Support D, 23°C, 70 hr, in reference fuel A (isooctane) 1.0ISO 175
    Support D, 23°C, 168 hr, in reference fuel A (isooctane) 0.0ISO 175
    Support D, 23°C, 336 hr, in reference fuel A (isooctane) 2.0ISO 175
    Support D, 23°C, 504 hr, in reference fuel A (isooctane) 0.0ISO 175
    Support D, 100°C, 70 hr, in ASTM #1 oil -5.0ISO 175
    Support D, 100°C, 70 hr, in ASTM #3 oil -5.0ISO 175
    Support D, 100°C, 168 hr, in ASTM #1 oil -4.0ISO 175
    Support D, 100°C, 168 hr, in ASTM #3 oil -4.0ISO 175
    Support D, 100°C, 336 hr, in ASTM #1 oil -3.0ISO 175
    Support D, 100°C, 336 hr, in ASTM #3 oil -3.0ISO 175
    Support D, 100°C, 504 hr, in ASTM #1 oil -2.0ISO 175
    Support D, 100°C, 504 hr, in ASTM #3 oil -2.0ISO 175
Change in Volume
    23°C, 70 hr, Class A standard fuel 2.0%ASTM D471
    23°C, 70 hr, Class C Standard Fuel 35%ASTM D471
    23°C, 168 hr, Class A standard fuel 3.0%ASTM D471
    23°C, 168 hr, Class C Standard Fuel 35%ASTM D471
    23°C, 336 hr, Class A standard fuel 4.0%ASTM D471
    23°C, 336 hr, Class C Standard Fuel 36%ASTM D471
    23°C, 504 hr, Class A standard fuel 4.0%ASTM D471
    23°C, 504 hr, Class C Standard Fuel 36%ASTM D471
    100°C, 70 hr, ASTM Standard Oil (No.1) 0.0%ASTM D471
    100°C, 70 hr, ASTM Standard Oil (No.3) 0.0%ASTM D471
    100°C, 168 hr, ASTM Standard Oil (No.1) 0.0%ASTM D471
    100°C, 168 hr, ASTM Standard Oil (No.3) 0.0%ASTM D471
    100°C, 336 hr, ASTM Standard Oil (No.1) 1.0%ASTM D471
    100°C, 336 hr, ASTM Standard Oil (No.3) 1.0%ASTM D471
    100°C, 504 hr, ASTM Standard Oil (No.1) 1.0%ASTM D471
    100°C, 504 hr, ASTM Standard Oil (No.3) 1.0%ASTM D471
    23°C, 70 hr, in reference fuel A 2.0%ISO 175
    23°C, 70 hr, in reference fuel C 35%ISO 175
    23°C, 168 hr, in reference fuel A 3.0%ISO 175
    23°C, 168 hr, in reference fuel C 35%ISO 175
    23°C, 336 hr, in reference fuel A 4.0%ISO 175
    23°C, 336 hr, in reference fuel C 36%ISO 175
    23°C, 504 hr, in reference fuel A 4.0%ISO 175
    23°C, 504 hr, in reference fuel C 36%ISO 175
    100°C, 70 hr, in ASTM #1 oil 0.0%ISO 175
    100°C, 70 hr, in ASTM #3 oil 0.0%ISO 175
    100°C, 168 hr, in ASTM #1 oil 0.0%ISO 175
    100°C, 168 hr, in ASTM #3 oil 0.0%ISO 175
    100°C, 336 hr, in ASTM #1 oil 1.0%ISO 175
    100°C, 336 hr, in ASTM #3 oil 1.0%ISO 175
    100°C, 504 hr, in ASTM #1 oil 1.0%ISO 175
    100°C, 504 hr, in ASTM #3 oil 1.0%ISO 175
ThermalNominal ValueUnitTest Method
Brittleness Temperature < -68.0°CASTM D746, ISO 974
Glass Transition Temperature -44.0°CDMA
Vicat Softening Temperature 106°CISO 306/50, ASTM D1525 4
Additional InformationNominal ValueUnitTest Method
Compressive Load ASTM D575
    10% Deflection 3.10MPaASTM D575
    15% Deflection 4.48MPaASTM D575
    2% Deflection 0.689MPaASTM D575
    20% Deflection 5.86MPaASTM D575
    25% Deflection 7.24MPaASTM D575
    5% Deflection 1.72MPaASTM D575
    50% Deflection 19.3MPaASTM D575
InjectionNominal ValueUnit
Drying Temperature - Desiccant Dryer 93.0 - 104°C
Drying Time - Desiccant Dryer 2.0hr
Suggested Max Moisture < 0.030%
Suggested Shot Size 40 - 80%
Suggested Max Regrind 20%
Rear Temperature 182 - 199°C
Middle Temperature 182 - 204°C
Front Temperature 182 - 210°C
Nozzle Temperature 188 - 213°C
Processing (Melt) Temp 202°C
Mold Temperature 16.0 - 43.0°C
Injection Pressure 41.4 - 96.5MPa
Clamp Tonnage 4.1 - 6.9kN/cm²
Screw L/D Ratio 20.0:1.0
Screw Compression Ratio 2.5:1.0 - 3.0:1.0
Injection instructions
Injection Pressure, Second Stage: 5000 to 10000 psiTimers (per 0.125 in cross section): Boost: 5 to 10 sec 2nd Stage: 10 to 30 sec Cool: 30 to 50 sec
ExtrusionNominal ValueUnit
Drying Temperature 93.0 - 104°C
Drying Time 2.0hr
Cylinder Zone 1 Temp. 182 - 199°C
Cylinder Zone 2 Temp. 193 - 210°C
Cylinder Zone 3 Temp. 193 - 216°C
Melt Temperature 202°C
Die Temperature 193 - 216°C
Note Message
1 .C mould
2 .Post-cured 16 hr at 230°F
3 .Post-cured 16 hr at 230°F
4 .速率 A (50°C/h)
Resin Grade Manufacturer Category Trademark
MALAT 37W200 AD majoris PBT MALAT
Retpol® PDR 7386/3 UV3 PolyPacific Pty. Ltd. PP, Unspecified Retpol®
Grilamid® L 25 nat EMS-GRIVORY Nylon 12 Grilamid®
MAJORIS CB370 AD majoris PP, Unspecified MAJORIS
POLIMAXX 1140U IRPC Public Company Limited PP Homopolymer POLIMAXX

TEL: +86-21-58958519 Email:sales@su-jiao.com

No. 215, Lianhe North Road, Fengxian District, Shanghai, China​， COPYRIGHT SUSHENG COMPANY RIGHTS RESERVED