Order Products : sales@su-jiao.com
Moplen HP601N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sZizCe_Moplen-HP601N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP601N is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP601N is a homopolymer typically used by customers in Glass Mat Sheet and thermoforming applications. Moplen HP601N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 34.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1670 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 107 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCUDIA® LDPE 2303FL | REPSOL | LDPE | ALCUDIA® LDPE |
| CP PRYME® Polycarbonate PC100RUL-10M BT Clear | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| EnCom PC-ABS QX 7002 | EnCom, Inc. | PC+ABS | EnCom |
| Lupolen 5121 A | LyondellBasell Industries | HDPE, HMW | Lupolen |
| Polimid A SG Y | Poliblend S.p.a. | Nylon 66 | Polimid A |
