Order Products : sales@su-jiao.com
Aristech Quarite Select Plus®
| Category: | Acrylic, Unspecified , Acrylic |
| Manufacturer: | Aristech Acrylics LLC |
| Trademark: | Aristech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sXZOCb_Aristech-Quarite-Select-Plus-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Aristech Quarite Select Plus® is an Acrylic material. It is available in North America for thermoforming. Important attributes of Aristech Quarite Select Plus® are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.10 | g/cm³ | ASTM D792 |
| Water Absorption 2(Saturation, 7.11 mm) | 0.19 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 3(M-Scale, 7.11 mm) | 90 to 100 | ASTM D785 | |
| Barcol Hardness 4(7.11 mm) | 48 to 52 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 5(7.11 mm) | 2620 | MPa | ASTM D638 |
| Tensile Strength 6(Yield, 7.11 mm) | 39.3 | MPa | ASTM D638 |
| Tensile Elongation 7(Break, 7.11 mm) | 3.5 | % | ASTM D638 |
| Flexural Modulus 8(7.11 mm) | 2230 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| 7.11 mm 9 | 81.4 | MPa | |
| 7.11 mm 10 | 70.3 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 11(7.11 mm) | 120 | J/m | ASTM D256A |
| Instrumented Dart Impact 12(7.11 mm) | > 40.7 | J | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 13(1.8 MPa, Unannealed, 7.11 mm) | 87.8 | °C | ASTM D648 |
| CLTE - Flow 14(7.11 mm) | 8.1E-5 | cm/cm/°C | ASTM D696 |
| Thermal Stability (180°C, 6.99 to 7.24 mm) 15 | No Effect | ASTM D4802 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cycles Freeze-Thaw - 50 (-29 to 82°C, 6.99 to 7.24 mm) | No Effect | Internal Method | |
| Hot Forming Temperature | Internal Method | ||
| ABS side : 6.99 to 7.24 mm | 300 to 340 | ||
| Acrylic side : 6.99 to 7.24 mm | 177 to 193 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 16(7.11 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 0.275 to 0.285 in |
| 2 . | 0.275 to 0.285 in |
| 3 . | 0.275 to 0.285 in |
| 4 . | 0.275 to 0.285 in |
| 5 . | 0.275 to 0.285 in |
| 6 . | 0.275 to 0.285 in |
| 7 . | 0.275 to 0.285 in |
| 8 . | 0.275 to 0.285 in, Acrylic in Tension |
| 9 . | 0.275 to 0.285 in, Acrylic in Tension |
| 10 . | 0.275 to 0.285 in, Acrylic in Compression |
| 11 . | 0.275 to 0.285 in |
| 12 . | 0.275 to 0.285 in, FTMS 406 M-1074 |
| 13 . | 0.275 to 0.285 in |
| 14 . | 0.275 to 0.285 in |
| 15 . | 30 min |
| 16 . | 0.275 to 0.285 in |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Chemlon® 120 G | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| DynaMix Lite™ 144-M | Polymer Dynamix | PP, Unspecified | DynaMix Lite™ |
| Hanwha Total PP HJ700 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Homopolymer | Hanwha Total PP |
| KOPELEN JH-350 | Lotte Chemical Corporation | PP Impact Copolymer | KOPELEN |
| Novalloy-A A2606 | PlastxWorld Inc. | ABS+Nylon | Novalloy-A |
