Order Products : sales@su-jiao.com
Chemieprene TPE ES-75NE
| Category: | SEBS+EPDM , Styrene Ethylene Butylene Styrene Block Copolymer + EPDM |
| Manufacturer: | CP Chemie Resources (M) Sdn. Bhd. |
| Trademark: | Chemieprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sWVnhy_Chemieprene-TPE-ES-75NE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The Chemieprene ES-75NE is a high performance thermoplastic elastomers- SEBS/EPDM (Styrene- Ethylene / Butylene-Styrene/ ethylene propylene diene monomer rubber) copolymer compounding. Chemieprene ES-75NE is the most premium material on the criteria of mechanization-Heat Stabilization, weather resistance, UV Stabilization, Flexibility and Comfortable. This grade of Chemieprene TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection moulding or extrusion. It's a soft, elastomeric polyolefine based, completely recyclable, colourable & non-hygroscopic thermoplastics elastomer. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D769 |
| Melt Mass-Flow Rate (MFR) | 5.0 - 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 - 78 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Tear Strength | 88.3 | kN/m | ASTM D624 |
| Additional Information |
|---|
| We confirmed we do not intentionally use the below listed substances in the manufacturing of or formulation of Chemieprene TPE compounds: Lead and its compounds Mercury and its compounds Hexavalent Chromium and its compounds Cadmium and its compounds. Polybrominated Biphenyls (PBBs) Polybrominated Diphenyl Ethers (PBDEs) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP243R | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| VICTREX® PEEK 150UF10 | Victrex plc | PEEK | VICTREX® PEEK |
| Epolene® N-34 | Westlake Chemical Corporation | LDPE | Epolene® |
| Jam PE 18YF5 | Jam Petrochemical Company | LLDPE | Jam PE |
| Sylvin 29000-60 Clear Yellow 4218 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
