Order Products : sales@su-jiao.com
Desmoderm® KB2W
| Category: | PUR-Ester , Polyurethane (Polyester based) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmoderm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sW9BRQ_Desmoderm-KB2W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Desmoderm KB2W is a one-component polyester urethane based on an aromatic diisocyanate. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity 1 | DIN EN ISO 3219/A.3 | ||
| Tempered 5 hr, 120°C : 23°C | 4.00 to 40.0 | Pa·s | |
| Untempered : 23°C | 4.00 to 20.0 | Pa·s |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Light-Fastness | 3.00 | DIN EN ISO 105-B02 | |
| Softening Range | 160 to 170 | °C |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 100 | µm | |
| Tensile Modulus - 100% (100 µm) | 5.00 to 6.00 | MPa | DIN 53504 |
| Tensile Strength | DIN 53504 | ||
| 100 µm | 45.0 to 55.0 | MPa | |
| 70°C, 100 µm 2 | 35.0 to 45.0 | MPa | |
| Tensile Elongation (Break, 100 µm) | 750 to 950 | % | DIN 53504 |
| Note Message | |
|---|---|
| 1 . | 20% solution in dimethylformamide |
| 2 . | after 14 days hydrolysis, 95% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ MVG120 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| ASTAMID™ MB3SX | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| Forprene® 6NM001A85 | SO.F.TER. SPA | TPV | Forprene® |
| LNP™ THERMOCOMP™ DX06411H compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
| PLEXIGLAS® Film 0F058 | Evonik Industries AG | Film, PMMA | PLEXIGLAS® Film |
