Order Products : sales@su-jiao.com

Tuftec™ P1500

Category:	SBBS , Styrene Butadiene Butylene Styrene Copolymer
Manufacturer:	AKelastomers
Trademark:	Tuftec™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sW6HuQ_Tuftec-P1500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
In common with all grades in the Tuftec™ P series, Tuftec™ P1500 is a new polymer type, termed SBBS, produced by selective hydrogenation at appropriate locations on the molecular chain of styrenic thermoplastic elastomer (styrene/butadiene/styrene; SBS). As a result, it is inherently outstanding in thermal properties, and superior in processability and low-temperature properties to the structurally similar Tuftec™ H series SEBS polymers. Tuftec™ P1500 is designed particularly for low-viscosity hot-melt adhesives, with good flow properties and a high-level balance in properties. Primarily for low-viscosity hot-melt adhesives. Superior to SBS in thermal stability. Reduced visicosity variance and discoloration. Compatible with full range of tackifiers, enabling broader range and freedom in selection of co-components and formulations than SBS or SEBS.

Message

In common with all grades in the Tuftec™ P series, Tuftec™ P1500 is a new polymer type, termed SBBS, produced by selective hydrogenation at appropriate locations on the molecular chain of styrenic thermoplastic elastomer (styrene/butadiene/styrene; SBS). As a result, it is inherently outstanding in thermal properties, and superior in processability and low-temperature properties to the structurally similar Tuftec™ H series SEBS polymers.
Tuftec™ P1500 is designed particularly for low-viscosity hot-melt adhesives, with good flow properties and a high-level balance in properties.

Primarily for low-viscosity hot-melt adhesives. Superior to SBS in thermal stability. Reduced visicosity variance and discoloration. Compatible with full range of tackifiers, enabling broader range and freedom in selection of co-components and formulations than SBS or SEBS.

General Information
Features	Good Flow Good Processability Good Thermal Stability Low Viscosity
Uses	Adhesives Low Temperature Applications
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	69		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	2.10	MPa	ISO 37
Tensile Stress ¹(Break)	3.30	MPa	ISO 37
Tensile Elongation ²(Break)	780	%	ISO 37

Additional Information	Nominal Value		Test Method
Styrene/Rubber ratio	30/70		Internal Method

Note Message
1 .	Type 1A, 500 mm/min
2 .	Type 1A, 500 mm/min

Resin Grade	Manufacturer	Category	Trademark
Sylvin 5145-70 Black 261	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Axiall PVC 53061A	Axiall Corporation	PVC, Flexible	Axiall PVC
ColorRx® PCT-1200RX	LTL Color Compounders, Inc.	PC+PET	ColorRx®
PLUSTEK PA340S8	Polyram Ram-On Industries	Nylon 66	PLUSTEK
TECHNYL® C 218 V45 BLACK	Solvay Engineering Plastics	Nylon 6	TECHNYL®