Order Products : sales@su-jiao.com

ISPLEN® PP 094 N2M

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	sVEVlA_ISPLEN-PP-094-N2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ISPLEN® PP 094 N2M is a polypropylene homopolymers of very high fluidity intended for injection moulding. It is a nucleated grade and is characterised by good flow properties that facilitates an easy mould filling and short
cycle times. Due to the specific crystalline structure, at the same time, it exhibits high stiffness and low warpage. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems.

TYPICAL APPLICATIONS
ISPLEN® PP 094 N2M is widely used for the production of consumer goods such us:

Food containers.

Rigid packaging with very thin walls.

Toys and small appliances.

Garden and domestic furniture.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Nucleating Agent
Features	Crystalline Fast Molding Cycle Food Contact Acceptable Good Chemical Resistance Good Colorability Good Moldability High Flow High Stiffness Low Warpage Nucleated
Uses	Appliances Food Containers Furniture Packaging Rigid Packaging Thin-walled Packaging Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	40	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	75		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1700	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	2.5	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	95.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
TRIMID® N66-T100	Polymer Technology and Services, LLC	Nylon 66	TRIMID®
Xuchuan XCY-5585EN	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Equinox® 35 Fast	Smooth-On, Inc	Silicone	Equinox®
Sylvin 8240-80 White 1584	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 802-80 Clear 876	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin