Order Products : sales@su-jiao.com
Glastic® TSF 1312
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sUuFYk_Glastic-TSF-1312.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glastic TSF 1312 general-purpose laminate is the most cost-effective fiberglass-reinforced laminate sheet available from Glastic. This resin exhibits outstanding punchability in thin thicknesses. It is widely used in motors and dry-type transformers, as well as a variety of other applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.78 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (yield, 1.60mm) | 64.8 | MPa | ASTM D638 |
| Flexural Strength (yield, 1.60mm) | 154 | MPa | ASTM D790 |
| Compressive Strength (1.60 mm) | 268 | MPa | ASTM D695 |
| Shear Strength | 92.4 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.60 mm) | 430 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (1.60 mm) | 2.2E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.26 | W/m/K | ASTM C177 |
| RTI Elec (1.60 mm) | 130 | °C | UL 746 |
| RTI (1.60 mm) | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| 1.60 mm, in Air | 16 | kV/mm | ASTM D149 |
| 1.60 mm, in Oil | 19 | kV/mm | ASTM D149 |
| Dissipation Factor (1.60 mm, 60 Hz) | 9.5E-3 | ASTM D150 | |
| Arc Resistance (1.60 mm) | 127 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Oxygen Index (1.60 mm) | 22 | % | ASTM D2863 |
| Additional Information |
|---|
| NEMA Grade: GPO-1/GPO-1PInsulation Resistance, ASTM D257: 2.4e12 ohms |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2800B-30D | RTP Company | TPV | RTP |
| TECHNO ABS 15 K6 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| KumhoSunny PC/PBT HCB9230M | Shanghai KumhoSunny Plastics Co., Ltd. | PC+PBT | KumhoSunny PC/PBT |
| Hostacom PPU X9067HS G62514 | LyondellBasell Industries | PP Copolymer | Hostacom |
| EPAMOULD 272D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
