Order Products : sales@su-jiao.com
EnCom GF PC-Polyester 1250
| Category: | PC+Polyester , Polycarbonate + Polyester |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sISMB1_EnCom-GF-PC-Polyester-1250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Specialty Filled PC/Polyester Alloy |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.30 to 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 68.6 | MPa | ASTM D638 |
| Flexural Modulus | 3280 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 112 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 85 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 135 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 to 110 | °C | |
| Drying Time | 2.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 243 to 271 | °C | |
| Middle Temperature | 249 to 277 | °C | |
| Front Temperature | 257 to 282 | °C | |
| Nozzle Temperature | 254 to 274 | °C | |
| Processing (Melt) Temp | 260 to 279 | °C | |
| Mold Temperature | 18.3 to 65.6 | °C | |
| Back Pressure | 0.172 to 0.689 | MPa | |
| Screw Speed | 20 to 100 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® OM-10275-01 | Teknor Apex Company | TPE | Monprene® |
| BMC 610 Special | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Arlon® 44N | Arlon-MED | Epoxy | Arlon® |
| Fainplast PVC MPH 78/T | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Generic Copolyester | Generic | Copolyester | Generic |
