Order Products : sales@su-jiao.com
Zytel® 70G33HS1L NC010
| Category: | Nylon 66 , NYLON RESIN |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Zytel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sGLQow_Zytel-70G33HS1L-NC010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 33% Glass Reinforced, Heat Stabilized, Polyamide 66 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.39 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.1 | -- | % | |
| Flow | 0.30 | -- | % | |
| Water Absorption | ||||
| 24 hr | 1.2 | -- | % | ASTM D570 |
| 23°C, 24 hr, 2.00 mm | 5.7 | -- | % | ISO 62 |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 1.8 | -- | % | ISO 62 |
| Viscosity Number | 130 | -- | cm³/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 10500 | 8000 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 200 | 140 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.5 | 5.0 | % | ISO 527-2 |
| Tensile Creep Modulus | ISO 899-1 | |||
| 1 hr | -- | 8000 | MPa | |
| 1000 hr | -- | 5500 | MPa | |
| Flexural Modulus | 9300 | 6210 | MPa | ISO 178 |
| Flexural Stress | 290 | 200 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -40°C | 10 | 10 | kJ/m² | |
| -30°C | 10 | 10 | kJ/m² | |
| 23°C | 13 | 17 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 70 | 75 | kJ/m² | |
| 23°C | 85 | 100 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -40°C | 10 | 10 | kJ/m² | |
| -30°C | 10 | 10 | kJ/m² | |
| 23°C | 12 | 15 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180/1U | |||
| -30°C | 70 | 70 | kJ/m² | |
| 23°C | 80 | 90 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 261 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 252 | -- | °C | ISO 75-2/A |
| Glass Transition Temperature 1 | 80.0 | -- | °C | ISO 11357-2 |
| Melting Temperature 2 | 262 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 1.8E-5 | -- | cm/cm/°C | |
| Transverse | 8.3E-5 | -- | cm/cm/°C | |
| Specific Heat Capacity | 1330 | -- | J/kg/°C |
| Fill Analysis | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Heat Capacity of Melt | 2210 | -- | J/kg/°C | |
| Thermal Conductivity of Melt | 0.22 | -- | W/m/K |
| Additional Information | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Emission of Organic Compounds | 6.00 | -- | µgC/g | VDA 277 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Constant | ||||
| 1 kHz | 4.50 | -- | ASTM D150 | |
| 1 MHz | 3.70 | -- | ASTM D150 | |
| 100 Hz | 4.20 | -- | IEC 60250 | |
| 1 MHz | 4.00 | -- | IEC 60250 | |
| Dissipation Factor | ||||
| 1 MHz | 2.0E-6 | -- | ASTM D150 | |
| 100 Hz | 0.010 | -- | IEC 60250 | |
| 1 MHz | 0.015 | -- | IEC 60250 | |
| Comparative Tracking Index (CTI) (3.00 mm) | PLC 1 | -- | UL 746 | |
| Comparative Tracking Index | 400 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate 3(1.00 mm) | 28 | -- | mm/min | ISO 3795 |
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 0.750 mm | HB | -- | ||
| 1.50 mm | HB | -- | ||
| Oxygen Index | 24 | -- | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| 2 . | 10°C/min |
| 3 . | SE/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RESINOL® EPF 400 | RASCHIG GmbH | Phenolic | RESINOL® |
| Tecomid® HT NT40 GR50 NL HS | Eurotec Engineering Plastics | PPA | Tecomid® HT |
| TechnoFiber PP LGF50-10 HI | TechnoCompound GmbH | PP, Unspecified | TechnoFiber |
| TARFLON™ UR2500M | Idemitsu Kosan Co., Ltd. | PC | TARFLON™ |
| DAI-EL™ G-801 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
