Category: | Nylon 66 , Polyamide 66 |
Manufacturer: | Teknor Apex Company (Chem Polymer) |
Trademark: | Chemlon® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | sFgD0G_Chemlon-AF303.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
AF303 is a 15% glass fibre reinforced nylon 66 that offers good mechanical performance coupled with good surface finish and flow. |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.24 | g/cm³ | ISO 1183 |
Molding Shrinkage 1 | 1.0 - 1.6 | % | Internal method |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 5200 | MPa | ISO 527-2 |
Tensile Stress (Break) | 110 | MPa | ISO 527-2 |
Tensile Strain (Break) | 5.0 | % | ISO 527-2 |
Flexural Modulus | 4700 | MPa | ISO 178 |
Flexural Stress 2 | 150 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Charpy Notched Impact Strength | 11 | kJ/m² | ISO 179 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature | |||
0.45 MPa, not annealed | > 240 | °C | ISO 75-2/B |
1.8 MPa, not annealed | 215 | °C | ISO 75-2/A |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
Dielectric Strength (3.00 mm) | 17 | kV/mm | IEC 60243-1 |
Relative Permittivity (1 MHz) | 3.80 | IEC 60250 | |
Dissipation Factor (1 MHz) | 0.010 | IEC 60250 | |
Comparative Tracking Index | > 600 | V | IEC 60112 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating (Teknor Apex test result) | HB | UL 94 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 80.0 | °C | |
Drying Time | 2.0 | hr | |
Rear Temperature | 270 - 290 | °C | |
Middle Temperature | 270 - 290 | °C | |
Front Temperature | 270 - 290 | °C | |
Processing (Melt) Temp | < 300 | °C | |
Mold Temperature | 80.0 - 90.0 | °C | |
Injection Rate | Fast | ||
Screw Speed | 50 - 200 | rpm |
Injection instructions |
---|
背压:低注射压力:高如果材料在空气中暴露的时间不超过3小时,则无需干燥。 |
Note Message | |
---|---|
1 . | Mould shrinkage is significantly influenced by many factors including wall thickness, gating, moulding shape and processing conditions. The range values given are determined from specimen bar mouldings of 1.5 mm to 4 mm wall thickness. They are provided as a guide for comparison purposes only and no guarantee should be inferred from their inclusion. (Specimens measured in the dry state, 24 hours after moulding). |
2 . | Break |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 1400 P TFE 10 | RTP Company | PPSU | RTP |
TOTAL Polypropylene PPC 4720WZ | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
ANYPOL SE-2000P | SH Energy & Chemical | PS (EPS) | ANYPOL |
Plasmer 5030N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
ULTEM™ HU1000 resin | SABIC Innovative Plastics | PEI | ULTEM™ |