Order Products : sales@su-jiao.com
MAJ'ECO DP290MBSE
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJ'ECO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sECoTh_MAJ-ECO-DP290MBSE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJ'ECO DP290MBSE is a vegetal fibre polyethylene compound intended for injection moulding and extrusion. MAJ'ECO DP290MBSE has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 7.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2300 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 27.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 1650 | MPa | ISO 178 |
| Flexural Stress 2 | 41.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 21 | kJ/m² | ISO 179/1eU |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 150 - 190 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | at Yield |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SynPlast™ 810TM-E | PolyOne Corporation | Tri (n-octyl, n-decyl) Trimellitate | SynPlast™ |
| TEREZ PA 6.6 HT 7500 GF 60 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Edgetek™ XT XT-500-CU00 | PolyOne Corporation | PC+PBT | Edgetek™ XT |
| Hax™ HFX 500S | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| KOCETAL® CN301C3 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
