Order Products : sales@su-jiao.com
Braskem PE MR-435UV
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s9rFx8_Braskem-PE-MR-435UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The resin MR 435UV is a Linear Low Density Polyethylene, 1-butene based, with good balance of processability, stiffness and environmental stress cracking resistance. Applications: This resin is indicated to produce rotomolded water tanks, parts for the automotive and agricultural segments. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.934 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00 mm, 10% Igepal, Compression Molded, F50 | 200 | hr | |
| 100% Igepal, F50 | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 21.0 | MPa | |
| Break, Compression Molded | 28.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Compression Molded | 15 | % | |
| Break, Compression Molded | > 1000 | % | |
| Flexural Modulus - 1% Secant (Compression Molded) | 720 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact | |||
| -40°C, 3.17 mm | 35.0 | J | |
| -40°C, 6.34 mm | 75.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 60.0 | °C | |
| 1.8 MPa, Unannealed | 41.0 | °C | |
| Peak Melting Temperature | 129 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 350 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIME TPO T310E | Prime Polymer Co., Ltd. | PP Impact Copolymer | PRIME TPO |
| UBE Nylon 1015 UC2 | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Aplax P2820GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| CERTENE™ HI-4052 | Muehlstein | HDPE | CERTENE™ |
| Heraflex® HA 60-22-60 | Radici Plastics | SEBS | Heraflex® |
