Order Products : sales@su-jiao.com
Gallonprene® GP100-4501
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s9ZDNu_Gallonprene-GP100-4501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP100-4501 is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Gallonprene®GP100-4501 application areas include engineering/industrial accessories, consumer goods and handles. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/0.325 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 4.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 120 - 140 | °C | |
| Middle Temperature | 130 - 150 | °C | |
| Front Temperature | 140 - 160 | °C | |
| Processing (Melt) Temp | 100 - 120 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Injection instructions |
|---|
| Processing Temperature Limit: 220°CInjection Pressure: LowBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 140 to 160°CCenter Temperature: 150 to 170°CFront Temperature: 160 to 180°CMelt Temperature: 100 to 120°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 220°CInjection Pressure: LowInjection Speed: LowBack Pressure: 20 to 50% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTOUGH RZ300G6 | Polyram Ram-On Industries | PC | RAMTOUGH |
| VAMPEEK A 5010 | Vamp Tech | PEEK | VAMPEEK |
| ASI POLYPROPYLENE 1407H-01 | A. Schulman Inc. | PP Impact Copolymer | ASI POLYPROPYLENE |
| CYCOLAC™ INP449 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| Jackdaw ABS/PC FX70GY6582 | Jackdaw Polymers | PC+ABS | Jackdaw ABS/PC |
