Order Products : sales@su-jiao.com
Kazan LLDPE PE2NT05-5
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s8sXvC_Kazan-LLDPE-PE2NT05-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: TU 2243-163-00203335-2005 Linear Low Density Polyethylene (LLDPE) of grade PE2NTO5-5 is designed for processing into high-tensile film used for cold food substances and production of household products. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.916 to 0.920 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 0.80 to 1.2 | g/10 min | |
| 193°C/21.6 kg | 15 to 19 | g/10 min | |
| Ash Content | < 0.030 | % | |
| Melt Flow | < 7.0 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Volatiles | < 0.070 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 10.0 | MPa | |
| Break | > 30.0 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SPESIN® KP212G30V0BL | Kolon Plastics, Inc. | PBT | SPESIN® |
| Stylac™ A100 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| ULTEM™ SILTEM-STM1500 resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| BESTNYL SI15VI01BH16 | Triesa Plastics | Nylon 6 | BESTNYL |
| ALTECH® PA6 ECO 3030/100 GB30 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
