Order Products : sales@su-jiao.com
Catalyst PS/2LRO
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Catalyst |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s2uLXa_Catalyst-PS-2LRO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Catalyst PS/2LR0 is a PE-based catalytic masterbatch that accelerates the crosslinking reaction during the solidification of pipeline products by exposing the pipeline to water or steam at high temperatures. The catalyst PS/2LR contains processing aids and low-reactivity aids that can improve processing performance under certain conditions. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.55 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.50 | g/10 min | ISO 1133 |
| Additional Information |
|---|
| 上述数据为典型的平均值用法及用量Catalyst PS/2LR0应该与硅烷可交联POLIDAN ®复合物按照5%：95%的比例一起使用。这两种组份应在挤出前共混或在使用自动进料器时，在加工过程中连续混合。一般不需要预烘干催化剂母料。着色Catalyst PS/2LR0和 POLIDAN®复合物可以与高品质PE类色母粒一起使用。 苏威特种聚合物建议使用前，对任何色母粒进行预烘干。存储产品必须按下列条件存储：-密封，包装袋完好 环境温度不超过40°C -室内放置，避免在阳光下曝晒 存放时间过长会造成产品性状改变。苏威特种聚合物建议按照包装印制生产日期，在12个月内使用完毕。如果没有满足上述条件，苏威特种聚合物不承担任何责任。包装Catalyst PS/2LR0包装成25kg/袋，堆放于货板供应。技术服务Catalyst PS/2LR0属于苏威特种聚合物催化剂产品系列， 应与POLIDAN®化合物一起使用。苏威特种聚合物技术服务部门为客户提供包括投产和产品使用过程中任何必要的进一步信息和建议。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 200 | °C | |
| Cylinder Zone 2 Temp. | 150 - 200 | °C | |
| Cylinder Zone 3 Temp. | 150 - 200 | °C | |
| Cylinder Zone 4 Temp. | 150 - 200 | °C | |
| Cylinder Zone 5 Temp. | 150 - 200 | °C | |
| Head Temperature | 200 | °C | |
| Extruder Screw L/D Ratio | 25:1 ~ 30:1 | ||
| Extruder Screw Compression Ratio | >2.5:1 | ||
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| 与POLIDAN®交联牌号共混的常用挤塑温度 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPAZ™ 330TS | Mando Advanced Materials Co., Ltd. | PPA | SEPAZ™ |
| TRIPET® LV2550GN45 | Samyang Corporation | PET | TRIPET® |
| KumhoSunny PC/ABS HAC8240 | Shanghai KumhoSunny Plastics Co., Ltd. | PC+ABS | KumhoSunny PC/ABS |
| LUVOCOM® 50/TF/15/BK-1 | Lehmann & Voss & Co. | PC | LUVOCOM® |
| Sylvin 9058-90UV Red 671 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
