Order Products : sales@su-jiao.com
RELENE® S42005
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | s1vHic_RELENE-S42005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| S42005 is a natural polyethylene grade recommended as a base resin for sheathing/jacketing in jelly filled telecommunications cables. It is designed to provide excellent processing characteristics and formulated to offer superior physical/electrical insulation properties including good environmental stress crack resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.942 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.55 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Injection Molded, F0) | > 500 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 500 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 600 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 118 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACRYLITE® Sheet 249 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® Sheet |
| Alathon® M5040 | LyondellBasell Industries | HDPE Copolymer | Alathon® |
| Altuglas® VS | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| BESTNYL SI00VI12BWX | Triesa Plastics | Nylon 6 | BESTNYL |
| Optix® CA-75 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
