Order Products : sales@su-jiao.com

Tecnoflon® NH

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rz8zgP_Tecnoflon-NH.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® NH is a high viscosity fluoroelastomer copolymer. Tecnoflon® NH is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® NH does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B. Some of the unique properties of TECNOFLON® NH are: Excellent compression set Lack of mould fouling Excellent mould release TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® NH is a high viscosity fluoroelastomer copolymer. Tecnoflon® NH is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® NH does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B.

Some of the unique properties of TECNOFLON® NH are:

Excellent compression set

Lack of mould fouling

Excellent mould release

TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer General Purpose Good Mold Release High Viscosity Low Compression Set
Uses	Blending Gaskets General Purpose Seals
Appearance	Translucent
Forms	Slab
Processing Method	Compounding Compression Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	27	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
REXtac® APAO RT 2585	Huntsman Corporation	PAO	REXtac® APAO
Sindustris PP HI5205G	Sincerity Australia Pty Ltd.	PP, Unspecified	Sindustris PP
Sylvin 8741-85 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
XYRON™ VT31V	Asahi Kasei Chemicals Corporation	PPE+PS	XYRON™
Kepital® F20-03H	Korea Engineering Plastics Co., Ltd	Acetal (POM) Copolymer	Kepital®