Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ DF002FV compound
| Category: | PC , Polycarbonate |
| Manufacturer: | SABIC Innovative Plastics Asia Pacific |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rxyXkQ_LNPTHERMOCOMPDF002FVcompound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP* Thermocomp* DX13354 compound is a 10% glass fiber reinforced, impact modified PC resin based LDS material solution with stable plating and RF performance. Good surface aesthetics and wide processing window makes it a good candidate for internal and external parts for Laser Direct Structuring applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 29 | g/10 min | ASTM D1238 |
| Molding Shrinkage | Internal method | ||
| Flow : 3.20mm | 0.30 | % | Internal method |
| Transverse flow : 3.20mm | 0.50 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3800 | MPa | ASTM D638 |
| Tensile Stress (Break) | 60.0 | MPa | ISO 527-2/5 |
| Tensile Elongation 2(Break) | 4.1 | % | ASTM D638 |
| Flexural Modulus 3(50.0 mm Span) | 3600 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, 50.0 mm Span) | 110 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 170 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 700 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.20mm | 125 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.20mm | 119 | °C | ASTM D648 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant | Internal method | ||
| 1.10 GHz | 3.05 | Internal method | |
| 1.90 GHz | 3.05 | Internal method | |
| 5.00 GHz | 3.04 | Internal method | |
| Dissipation Factor | Internal method | ||
| 1.10 GHz | 0.014 | Internal method | |
| 1.90 GHz | 0.013 | Internal method | |
| 5.00 GHz | 0.011 | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 270 - 295 | °C | |
| Middle Temperature | 270 - 295 | °C | |
| Front Temperature | 270 - 295 | °C | |
| Nozzle Temperature | 270 - 295 | °C | |
| Processing (Melt) Temp | 270 - 295 | °C | |
| Mold Temperature | 100 - 120 | °C |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | Type 1, 5.0 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200.5 D TFE 10 | RTP Company | Nylon 612 | RTP |
| RTP 200 UV | RTP Company | Nylon 66 | RTP |
| RTP 800 MS 1 EG | RTP Company | Acetal (POM) Copolymer | RTP |
| WanBlend® WHT-1175M | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | WanBlend® |
| Borstar® FB2230 | Borealis AG | LLDPE | Borstar® |
