Order Products : sales@su-jiao.com
Ferro PP LPP10YE09BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rxhfNw_Ferro-PP-LPP10YE09BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ferro PP LPP10YE09BK is a Polypropylene Homopolymer (PP Homopolymer) material filled with 11% calcium carbonate. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Ferro PP LPP10YE09BK: Homopolymer. Typical application of Ferro PP LPP10YE09BK: Food Contact Applications |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.8 | % | |
| Across Flow | 2.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 34.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 20 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant : 23°C | 1830 | MPa | |
| Tangent : 23°C | 1920 | MPa | |
| Flexural Strength (23°C) | 50.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 32 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 510 | J/m | ASTM D4812 |
| Gardner Impact (23°C) | 0.565 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 110 | °C | |
| 1.8 MPa, Unannealed | 62.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3893 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| MAXAMID™ PA66M40HSL-BK10 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Shinko-Lac® ASA FA-30 | Mitsubishi Rayon America Inc. | ASA+PC | Shinko-Lac® |
| Kepamid® 2320GF | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| Dryflex® SE 75A001 | ELASTO | TPE | Dryflex® |
