Order Products : sales@su-jiao.com
SABIC® PPcompound 7560
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rxMD8A_SABIC-PPcompound-7560.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 7560 is a development grade. A Mineral Filled Modified Polypropylene for use in automotive exterior applications.This material has been designed to combine a good performance profile with good processing. SABIC® PPcompound 7560 is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.55 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20 mm, Injection Molded | 16.5 | MPa | |
| Break, 3.20 mm, Injection Molded | 11.5 | MPa | |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | 60 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 45 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength | ISO 180/4A | ||
| -20°C, Injection Molded | 20 | kJ/m² | |
| 0°C, Injection Molded | No Break | ||
| 23°C, Injection Molded | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 100 | °C | ISO 75-2/B |
| CLTE - Flow (23 to 80°C) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-1220P | QTR, Inc. | PC+ABS | QR Resin |
| AMPAL® MPV 7250 | RASCHIG GmbH | Polyester, TS | AMPAL® |
| Generic PC - Stainless Steel Fiber | Generic | PC | Generic |
| ENFLEX V1060A BLK UV | ENPLAST Americas, a Ravago Group Company | TPV | ENFLEX |
| Lupolen 2427 F | LyondellBasell Industries | LDPE | Lupolen |
