Order Products : sales@su-jiao.com

RELENE® 46GP009

Category:	HDPE , High Density Polyethylene
Manufacturer:	Reliance Industries Limited
Trademark:	RELENE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rxAx6f_RELENE-46GP009.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Relene 46GP009 (PE:63) is a natural coloured grade for pipe extrusion and for pesticide bottles. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic Strength requirements of material grade PE:63 as per IS 4984. When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS: 4984, Pipes will meet PE:63 requirements . This grade has excellent ESCR properties and suitable for pesticide bottles up to 1 litre capacity.

Message

Relene 46GP009 (PE:63) is a natural coloured grade for pipe extrusion and for pesticide bottles. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic Strength requirements of material grade PE:63 as per IS 4984. When incorporated with adequate quantity of carbon black as specified in clause 5.2.3 of IS: 4984, Pipes will meet PE:63 requirements .

This grade has excellent ESCR properties and suitable for pesticide bottles up to 1 litre capacity.

General Information
Features	Bimodal Molecular Weight Distribution Food Contact Acceptable Good Processability High ESCR (Stress Crack Resist.)
Uses	Bottles Piping
Agency Ratings	FDA 21 CFR 177.1520 IS 10141-1982 IS 10146-1982
Appearance	Natural Color
Processing Method	Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.946	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	< 1.1	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, Compression Molded, F50)	> 1000	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, Compression Molded)	24.0	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield, Compression Molded	11	%
Break, Compression Molded	> 500	%

Resin Grade	Manufacturer	Category	Trademark
Rilsamid® AESNO TL	Arkema	Nylon 12	Rilsamid®
ADDILENE H 532 N30	ADDIPLAST	PP Homopolymer	ADDILENE
ASTALON™ H4000	Marplex Australia Pty. Ltd.	PC	ASTALON™
Cellophane™ 600P23	Innovia Films Ltd.	Cellulose, Regenerated	Cellophane™
Kumho KTR KTR-301	Korea Kumho Petrochemical Co., Ltd.	SBS	Kumho KTR