Order Products : sales@su-jiao.com
Soarnol® H4815
| Category: | EVOH , Ethylene Vinyl Alcohol |
| Manufacturer: | Soarus L.L.C. |
| Trademark: | Soarnol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rw5CUk_Soarnol-H4815.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Soarnol H4815 is a 48 mol% ethylene content grade of Soarnol with a high melt flow rate. Soarnol H4815 has the best water resistance of all Soarnol grades and its gas barrier property is not drastically lower at high humidity. This resin is used in coextruded film, coextrusion coating, and shrink packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 16 | g/10 min | |
| Ethylene Content | 48.0 | wt% | Internal method |
| Volatile Matter | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Permeability 1(20°C, 25 µm) | 3.78 | cm³/m²/24 hr | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 48.0 | °C | DSC |
| Melting Temperature | 158 | °C | DSC |
| Peak Crystallization Temperature (DSC) | 138 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Cylinder Zone 5 Temp. | 220 | °C | |
| Adapter Temperature | 220 | °C |
| Extrusion instructions |
|---|
| Extruder: 40 mm Single screw extruder, L/D = 28Screw: Full-flighted, constant pitch type, CR = 3.5Screen pack: 80/120/50 meshDie: Manifold type, die width = 450 mm, lip clearance = 0.2 mm |
| Note Message | |
|---|---|
| 1 . | Measured with OXTRAN 10/50 (MOCON), 65%RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 246 V30 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| UBE Nylon 1013 IU50 | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| NORYL GTX™ GTX964 resin | SABIC Innovative Plastics Europe | PPE+PS+Nylon | NORYL GTX™ |
| ELASTOSIL® AUX PRIMER G 3242 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| Elvakon® 4452 | Lucite International Inc. | Acrylic (PMMA) | Elvakon® |
