Order Products : sales@su-jiao.com

POYAD SS102

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pooya Polymer Tehran
Trademark:	POYAD
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rvMA2h_POYAD-SS102.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Slip/Anti-Static MB Description POYAD SS102 is a PP homo polymer based Slip/Anti-Static MB for CPP and BOPP films, where low Coefficient Of Friction, low haze and low charge decay time are required. Containing high purity agent, POYAD SS102 exhibits good heat stability and long term efficiency and any negative characteristics of film such as discoloration, odor and contamination will be avoided. As POYAD SS102 contains a migrating agent, the printing properties might be slightly affected. So prechecking of printing and sealing of final film should be considered. Application POYAD SS102 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application, type of base resin, film thickness and desired slip/electrostatic properties it can be used from 1 to 4% in core layer. It should be stored in a dry and cool place not to exceed 6 months.

Message

Slip/Anti-Static MB

Description
POYAD SS102 is a PP homo polymer based Slip/Anti-Static MB for CPP and BOPP films, where low Coefficient Of Friction, low haze and low charge decay time are required.
Containing high purity agent, POYAD SS102 exhibits good heat stability and long term efficiency and any negative characteristics of film such as discoloration, odor and contamination will be avoided.
As POYAD SS102 contains a migrating agent, the printing properties might be slightly affected. So prechecking of printing and sealing of final film should be considered.

Application
POYAD SS102 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending.
Depending on the application, type of base resin, film thickness and desired slip/electrostatic properties it can be used from 1 to 4% in core layer.
It should be stored in a dry and cool place not to exceed 6 months.

General Information
Additive	Antistatic Slip
Features	Antistatic Good Thermal Stability Homopolymer Slip
Uses	Film Masterbatch
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.930	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	40 to 60	g/10 min	ASTM D1238
Moisture Content	< 1000	ppm	ASTM D644

Additional Information	Nominal Value	Unit	Test Method
Dispersion	OK		Internal Method
Pellet Size	30.0 to 40.0	pcs/cm³	Internal Method

Resin Grade	Manufacturer	Category	Trademark
Radilon® BGV 30 Natural	Radici Plastics	Nylon 6	Radilon®
TEREZ PA/PP 7250/1	TER HELL PLASTIC GMBH	Nylon 6+PP	TEREZ PA/PP
Plaslube® PEEK TL15 A	Techmer Engineered Solutions	PEEK	Plaslube®
Sylvin 6185-80 Grey 9600	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TechnoDur PBT4 GK 30 Natural (9949)	TechnoCompound GmbH	PBT	TechnoDur