Order Products : sales@su-jiao.com

POLYFLON™ M-391S

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Daikin Fluorochemicals (China) Co., Ltd.
Trademark:	POLYFLON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rudWzQ_POLYFLON-M-391S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed. There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application. Features Good flowability, small particle size, sharp particle size distribution and low electrostatic charging property. Its molding articles have extremely smooth surfaces. Suited for thin-walled mold gap and iso static molding because of the excellent filling property. Can be used in the case of lack of press ability of the mold machine, for example, large size sheet, from one side press, etc.

Message

POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed.

There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application.

Features
Good flowability, small particle size, sharp particle size distribution and low electrostatic charging property. Its molding articles have extremely smooth surfaces. Suited for thin-walled mold gap and iso static molding because of the excellent filling property. Can be used in the case of lack of press ability of the mold machine, for example, large size sheet, from one side press, etc.

General Information
Features	Good Flow High Viscosity
Uses	Sheet
Forms	Powder
Processing Method	Compression Molding

Physical	Nominal Value	Unit
Apparent Density	0.80	g/cm³
Average Particle Size	350	µm

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P1860D	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
NOVACARB NC-8810M	NOVA Polymers, Inc.	PC+ABS	NOVACARB
Acrigel® ECL200	Unigel Plásticos	Acrylic (PMMA)	Acrigel®
Sylvin 4225-85 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
ALCOM® PA6 900/5.2 CF/MR25	ALBIS PLASTIC GmbH	Nylon 6	ALCOM® PA6