Order Products : sales@su-jiao.com
Infino XP-4240
| Category: | PPS+PPA , Polyphenylene Sulfide + PPA |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rs1wwd_Infino-XP-4240.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Infino XP-4240 is a Polyphenylene Sulfide + PPA (PPS+PPA) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (330°C/5.0 kg) | 60 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | ASTM D955, ISO 2577 | ||
| Flow : 3.20 mm | 0.25 to 0.30 | % | |
| Across Flow : 3.20 mm | 0.34 to 0.41 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785, ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 9800 | MPa | ASTM D638 |
| -- | 15500 | MPa | ISO 527-2/50 |
| Tensile Strength | |||
| Yield 2 | 130 | MPa | ASTM D638 |
| Yield | 164 | MPa | ISO 527-2/50 |
| Break 3 | 150 | MPa | ASTM D638 |
| Break | 164 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Break 4 | 2.7 | % | ASTM D638 |
| Break | 2.0 | % | ISO 527-2/50 |
| Flexural Modulus 5 | |||
| -- | 12000 | MPa | ASTM D790 |
| -- | 18900 | MPa | ISO 178 |
| Flexural Strength 6 | |||
| -- | 160 | MPa | ASTM D790 |
| -- | 230 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 7(23°C) | 7.2 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 71 | J/m | ASTM D256 |
| 23°C, 6.35 mm | 57 | J/m | ASTM D256 |
| 23°C 8 | 7.6 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 6.40 mm | 281 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 4.00 mm | 285 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 6.40 mm | 270 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 4.00 mm | 277 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.800 to 3.00 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 120 | °C | |
| Desiccant Dryer | 120 | °C | |
| Drying Time | |||
| -- | 4.0 to 6.0 | hr | |
| Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Rear Temperature | 280 to 290 | °C | |
| Middle Temperature | 290 to 300 | °C | |
| Front Temperature | 310 to 320 | °C | |
| Nozzle Temperature | 320 | °C | |
| Mold Temperature | 120 to 150 | °C | |
| Injection Pressure | 49.0 to 127 | MPa | |
| Back Pressure | 0.490 to 1.96 | MPa | |
| Screw Speed | 50 to 150 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 5.0 mm/min |
| 5 . | 2.8 mm/min |
| 6 . | 2.8 mm/min |
| 7 . | Thickness: 4 mm |
| 8 . | Thickness: 4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| EVALENE® LLDPE LF20185 | JG Summit Petrochemical Corporation | LLDPE | EVALENE® LLDPE |
| EnCom GF10 ABS 1001 | EnCom, Inc. | ABS | EnCom |
| Grivory® HT1V-4 HY black 9205 | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
| Lushan M-10A | Guangzhou Lushan New Materials Co., Ltd | PE, Unspecified | Lushan |
| SD POLYCA™ CR3441-10G | Sumika Styron Polycarbonate Limited | PC+PBT | SD POLYCA™ |
