Order Products : sales@su-jiao.com
S&E Automotive XP23-45MG
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E Automotive |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rr88EE_S-E-Automotive-XP23-45MG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PVC weatherable, integral colored, filled, Body side molding end caps and extruded skin compound. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | < 1.30 | g/cm³ | ASTM D792A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 42 to 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | > 12.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 200 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | > 75 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Flexibility | -10 | °C | GM 9503P |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Accelerated Weathering Duration 4 | < 3.00 | SAE J2527 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | Method B |
| 4 . | after 2000 kj/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® N8950 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TABOND 5010 | SILON s.ro | PP, Unspecified | TABOND |
| Texalan® 2 Series 295A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| Xuchuan XCW-6300T | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| PETILEN F2-21T | PETKIM Petrokimya Holding A.S. | LDPE | PETILEN |
