AFFINITY™ PL 1280G Datasheet,POP,The Dow Chemical Company-SHANGHAI SUSHENG

AFFINITY™ PL 1280G

Category:	POP , Polyolefin Plastomer
Manufacturer:	The Dow Chemical Company
Trademark:	AFFINITY™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rqnM8y_AFFINITY-PL-1280G.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AFFINITY™PL 1280G polyolefin plastomer is a polyolefin plastomer (POP), which is prepared by INSITE of Dow Plastics Division™Technology, specially used as sealant layer in soft structures such as meat, cheese, dry goods and consumer goods packaging materials. Due to its excellent low-temperature heat-sealing performance, ultimate thermal adhesive strength, optical properties and strength, it is especially suitable for high-speed molding-filling-heat-sealing packaging production lines. remarks: when the resin is applied to the food contact field without modification, the resin meets the regulatory requirements for contact food substances (FCN) under the federal food, drug and cosmetic act of the United States, and its market access notice has been effective from October 7, 2004 in accordance with the FCN 424. The food contact certification notice allows the product to be used as an article or component in the production of articles in contact with food. These food types are described in the U.S. Food and Drug Administration Regulation 21 CFR § 176.170(c) Table -2 of the use conditions A to H. The composition of this product complies with EU directives EU, No 10/2011 manufacturers should be aware that foods with high oil content may reduce the integrity of packaging. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations. Application field: cast film

Message

AFFINITY™PL 1280G polyolefin plastomer is a polyolefin plastomer (POP), which is prepared by INSITE of Dow Plastics Division™Technology, specially used as sealant layer in soft structures such as meat, cheese, dry goods and consumer goods packaging materials. Due to its excellent low-temperature heat-sealing performance, ultimate thermal adhesive strength, optical properties and strength, it is especially suitable for high-speed molding-filling-heat-sealing packaging production lines.

remarks: when the resin is applied to the food contact field without modification, the resin meets the regulatory requirements for contact food substances (FCN) under the federal food, drug and cosmetic act of the United States, and its market access notice has been effective from October 7, 2004 in accordance with the FCN 424. The food contact certification notice allows the product to be used as an article or component in the production of articles in contact with food. These food types are described in the U.S. Food and Drug Administration Regulation 21 CFR § 176.170(c) Table -2 of the use conditions A to H. The composition of this product complies with EU directives
EU, No 10/2011
manufacturers should be aware that foods with high oil content may reduce the integrity of packaging. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations.

Application field:
cast film

General Information
Agency Ratings	FDA FCN 424 HPFB (Canada) No Objection Europe No 10/2011
Forms	Particle
Processing Method	cast film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.0	g/10 min	ISO 1133

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Tensile Stress ¹			ISO 527-3
MD : Yield, 25 µm	5.80	MPa	ISO 527-3
TD : Yield, 25 µm	5.30	MPa	ISO 527-3
MD : Break, 23 µm	48.0	MPa	ISO 527-3
TD : Break, 23 µm	30.0	MPa	ISO 527-3
Tensile Elongation ²			ISO 527-3
MD : Break, 25 µm	470	%	ISO 527-3
TD : Break, 25 µm	720	%	ISO 527-3
Dart Drop Impact ³(25 µm)	290	g	ISO 7765-1/B
Elmendorf Tear Strength ⁴			ASTM D1922
MD : 25 µm	78	g	ASTM D1922
TD : 25 µm	410	g	ASTM D1922
Seal Initiation Temperature ⁵(25 µm)	88.0	°C	Internal method

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	81.0	°C	ASTM D1525
Melting Temperature (DSC)	96.0	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss ⁶(20°, 25.0 µm)	91		ASTM D2457
Haze ⁷(25.0 µm)	4.0	%	ISO 14782

Additional Information
突出显示测试机器。

Note Message
1 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.
2 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.
3 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.
4 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.
5 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap. The temperature required to reach 5.25 N/15mm heat seal strength.
6 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.
7 .	Single-layer cast film, extruded at 274°C, 0.5mm die gap.

Resin Grade	Manufacturer	Category	Trademark
RTP 200 TFE 20	RTP Company	Nylon 66	RTP
POPELEN RX-20000	Lotte Chemical Corporation	PP Impact Copolymer	POPELEN
Resiten® CEM800	ITEN INDUSTRIES	Phenolic	Resiten®
NuSil EPM-2462	NuSil Technology	Silicone	NuSil
ULTEM™ 2310F resin	SABIC Innovative Plastics	PEI	ULTEM™

Resin Grade

Manufacturer