Order Products : sales@su-jiao.com

NuSil CV-2961

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rq8wPD_NuSil-CV-2961.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.8 W/m-K Low Viscosity, Primed Lap Shear 205 psi (1.4 MPa), Low Temp

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.8 W/m-K Low Viscosity, Primed Lap Shear 205 psi (1.4 MPa), Low Temp

General Information
Features	Low to No Outgassing Low Viscosity Thermally Conductive
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	2.8E-4	cm/cm/°C
Thermal Conductivity	0.80	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.38	g/cm³
Viscosity ¹	300	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	75
Lap Shear Strength ²	1.41	MPa
Tensile Strength	1.90	MPa
Tensile Elongation at Break	40	%
Tear Strength	7.88	kN/m

Note Message
1 .	Part A
2 .	Primed with SP-130

Resin Grade	Manufacturer	Category	Trademark
Network Polymers PP PPH 30 2000 GF30	Network Polymers, Inc.	PP Homopolymer	Network Polymers PP
ACCUTECH™ HP0334T20L1	ACLO Compounders Inc.	PP Homopolymer	ACCUTECH™
BCC Resins BC 7053	BCC Products Inc.	Epoxy	BCC Resins
DINALON® B1S25 H	Grupo Repol	Nylon 6	DINALON®
Jampilen HP515M	Jam Polypropylene Company	PP Homopolymer	Jampilen