Order Products : sales@su-jiao.com
Badaflex® TPE-S 40A 1588
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | riahHb_Badaflex-TPE-S-40A-1588.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer as a standard injection moulding grade based on SEBS Copolymer Overmoulding capabilit: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 40 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 3.00 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 500 | % | DIN 53504 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 16 | % | |
| 70°C, 24 hr | 41 | % | |
| 100°C, 24 hr | 70 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 9.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOREN PH 82 T 10 | SILON s.ro | PP Homopolymer | TABOREN |
| TRIEL® 5652EM | Samyang Corporation | TPEE | TRIEL® |
| CALP 1620G-1 | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| MAJORIS G551/20 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Sylvin 8980-70LG Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
