Order Products : sales@su-jiao.com
CERTENE™ PHM-5A
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | riabfC_CERTENE-PHM-5A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHM-5A is a certified prime grade Polypropylene specially designed for extrusion and injection molding applications. PHM-5A contains antistatic and combines good processability and high thermal stability, with medium flow, high tensile strength, good stiffness and good contact clarity. PHM-5A applications include drinking straws, small profiles, housewares, toys, and technical parts subject to normal stresses. PHM-5A recommended processing temperature is between 210° to 230°C. PHM-5A complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 33.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 151 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 98.9 - 110 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 901 TFE 10 Z | RTP Company | PSU | RTP |
| GETILAN MAC/900 | Crosspolimeri S.p.A. | LDPE | GETILAN |
| HiFill® PA6 0685 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| ULTEM™ CRS5201 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Moplen HP648N | LyondellBasell Industries | PP Homopolymer | Moplen |
