Order Products : sales@su-jiao.com
Plasmer 1380N/1002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Plasmer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rhfxYQ_Plasmer-1380N-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wide service temperature range, resistance, compression set, recyclable |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/7.06 kg) | 6.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.02 | MPa | ASTM D412 |
| Tensile Strength (Break) | 39.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CP PRYME® Polyethylene PE100LLD-50M | Chase Plastics Services Inc. | LLDPE | CP PRYME® Polyethylene |
| Desmovit® DP R 3922 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| EPO-TEK® OG142-95 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| HiFill® PA6/6 GF/M38 HS | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| CYCOLOY™ CX7240U resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
