Order Products : sales@su-jiao.com
Syncure™ S1042A Natural
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Syncure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rg7SKz_Syncure-S1042A-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Moisture cross-linked polyethylene composite material. Base resin composition, used in the Syncure system of Plivan. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Apparent Density 1 | 1.70 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 0.73 | g/10 min | ASTM D1238 |
| Gel Content 3 | 75 | % | ASTM D2765 |
| Appearance | Particles/cubes | ASTM D2090 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation 4(131°C) | 5.0 | % | UL 1581 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 5(Break) | 13.1 | MPa | ASTM D638 |
| Tensile Elongation 6(Break) | 300 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Additional Information |
|---|
| 张力、变形值、热蠕变和凝胶值基于 95 phr S1042A / 5 phr S1000B系统测量得出；并在90摄氏度的水中硫化6小时。脆化温度为 |
| Note Message | |
|---|---|
| 1 . | Geon® 1169 |
| 2 . | Procedure A |
| 3 . | Cross-linked PE, Method B (Non-Arbitration Test) |
| 4 . | 500g,1 hour |
| 5 . | Type 4, 510mm/min |
| 6 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 8715L-80 | Colorite Polymers | PVC, Unspecified | Unichem |
| Nipol® 1442 | Zeon Chemicals L.P. | NBR | Nipol® |
| AKROMID® T1 ICF 20 black (5147) | AKRO-PLASTIC GmbH | PPA | AKROMID® |
| INSPIRE™ TF1301 | Trinseo | PP, Unspecified | INSPIRE™ |
| PolyFibra® PF-PEF02 | FuturaMat | PP, Unspecified | PolyFibra® |
